COMPANY HEADER
CAD (0) ▾
  • Cart is empty
  1. Request CAD files
Terms
Request Information Add to CAD Cart
Spherical bearings are designed to manage high radial loads even when misalignment, poor lubrication, contamination, extreme speeds or critical application stresses are present.
Unit of Measure

Key Dimensions

Design Unit

 N/A Metric

Bore (d)

 N/A 40 mm

O.D. (D)

 N/A 90 mm3.5433 in

B' - Inner Ring Width

 N/A 33 mm1.2992 in

B - Outer Ring Width

 N/A 33 mm1.2992 in

Bore_Taper

 N/A 1/12

Dynamic Radial Load Rating - 1M Revs (C1)

 N/A 147000 N33100 lbf
e Factor1 N/A 0.36

Dimensions

R - Inner Ring "To Clear" Radius2 N/A 1.50 mm0.060 in
r - Outer Ring "To Clear" Radius3 N/A 1.5 mm0.06 in

Shaft Backing Shoulder Diameter

 N/A 53.000 mm2.100 in

Housing Backing Shoulder Diameter

 N/A 81.00 mm3.200 in

Basic Load Ratings

Static Radial Load Rating (C0)

 N/A 137000 N30800 lbf

Thermal Reference Speed - Grease 

 N/A 5700 rpm
Thermal Reference Speed - Oil4 N/A 6800 rpm

Key Dimensions

Y0 Factor5 N/A 1.83

Factors

Y1 Factor 6 N/A 1.87
Y2 Factor 7 N/A 2.79
Geometry Factor (Cg)8 N/A 0.0458
  • 1 These factors apply for both inch and metric calculations. Consult your Timken representative for instruction on use.
  • 2 Maximum housing fillet radius that bearing corners will clear.
  • 3 Maximum shaft fillet radius that bearing corners will clear.
  • 4 See thermal speed ratings in the engineering section.
  • 5 These factors apply for both inch and metric calculations. See engineering
  • 6 These factors apply for both inch and metric calculations. Consult your Timken representative for instruction on use.
  • 7 These factors apply for both inch and metric calculations. Consult your Timken representative for instruction on use.
  • 8 Geometry constant for Lubrication Life Adjustment Factor a3l.