CAD (0) ▾
  • Cart is empty
  1. Request CAD files

Key Features

  • Longer bearing life achieved from higher capacity (vs. competitors)
  • Longer lubrication life achieved from lower operating temperatures due to reduced internal friction and running torque from cage guided rollers
  • Better contaminant purging from slots on cage face helps extend bearing life
  • Greater fatigue strength and increased wear resistance provide tougher protection against shock and acceleration loading from a brass cage
Request Information
Unit of Measure

Key Dimensions

Bore (d)

 N/A 420 mm

O.D. (D)

 N/A 700 mm27.5590 in

Width (B)

 N/A 224 mm8.8190 in

Dynamic Radial Load Rating - 1M Revs (C1)

 N/A 5720000 N1290000 lbf
e Factor1 N/A 0.31

Other Dimensions

Max Shaft Fillet Radius2 N/A 5 mm0.200 in

Shaft Backing Shoulder Diameter

 N/A 480 mm18.9000 in

Housing Backing Shoulder Diameter

 N/A 636.000 mm25.100 in

Design Unit

 N/A Metric

Ratings

Static Radial Load Rating (C0)

 N/A 9640000 N2170000 lbf

Thermal Reference Speed - Grease 

 N/A 440 rpm
Thermal Reference Speed - Oil3 N/A 490 rpm

Factors

Y0 Factor4 N/A 2.16
Y1 Factor 5 N/A 2.21
Y2 Factor 6 N/A 3.2
Geometry Factor (Cg) 7 N/A 0.0957
  • 1 These factors apply for both inch and metric calculations. Consult your Timken representative for instruction on use.
  • 2 Maximum housing fillet radius that bearing corners will clear.
  • 3 See thermal speed ratings in the engineering section.
  • 4 These factors apply for both inch and metric calculations. See engineering
  • 5 These factors apply for both inch and metric calculations. Consult your Timken representative for instruction on use.
  • 6 These factors apply for both inch and metric calculations. Consult your Timken representative for instruction on use.
  • 7 Geometry constant for Lubrication Life Adjustment Factor a3l.