Part Number 23224KEMW33C3, Spherical Roller Bearings - Brass Cage On The Timken Company

Unit of Measure

Key Dimensions | Dimensions | Basic Load Ratings | Key Dimensions | Factors

Design Unit	N/A Metric
Bore (d)	N/A 120 mm
O.D. (D)	N/A 215 mm8.4646 in
B' - Inner Ring Width	N/A 76 mm2.9921 in
B - Outer Ring Width	N/A 76 mm2.9921 in
Bore_Taper	N/A 1/12
Dynamic Radial Load Rating - 1M Revs (C1)	N/A 1040000 N234000 lbf
e Factor¹	N/A 0.32

R - Inner Ring "To Clear" Radius²	N/A 2.0 mm0.080 in
r - Outer Ring "To Clear" Radius³	N/A 2 mm0.08 in
Shaft Backing Shoulder Diameter	N/A 142 mm5.6000 in
Housing Backing Shoulder Diameter	N/A 197 mm7.700 in

Static Radial Load Rating (C0)	N/A 824000 N185000 lbf
Thermal Reference Speed - Grease	N/A 1900 rpm
Thermal Reference Speed - Oil⁴	N/A 2100 rpm

Y0 Factor⁵

N/A 2.05

¹ These factors apply for both inch and metric calculations. Consult your Timken representative for instruction on use.
² Maximum housing fillet radius that bearing corners will clear.
³ Maximum shaft fillet radius that bearing corners will clear.
⁴ See thermal speed ratings in the engineering section.
⁵ These factors apply for both inch and metric calculations. See engineering
⁶ These factors apply for both inch and metric calculations. Consult your Timken representative for instruction on use.
⁷ These factors apply for both inch and metric calculations. Consult your Timken representative for instruction on use.
⁸ Geometry constant for Lubrication Life Adjustment Factor a3l.

Design Unit