Montage of Timken Bearing Products
Batch CAD Cart (0) ▾
  • Cart is empty
  1. Click Here for Batch Download
Request Information Add to CAD Cart
Spherical bearings are designed to manage high radial loads even when misalignment, poor lubrication, contamination, extreme speeds or critical application stresses are present.
Unit of Measure

Specifications

UPC Code

 N/A 087796224056

Design Unit

 N/A Metric

d - Bore

 N/A 35 mm

Lubrication Type

 N/A Standard Grease

Cage Type

 N/A EJ

Cage Material

 N/A Steel

Superseded Part

 N/A 21307CJW33C4

Factors

e - ISO Factor1 N/A 0.26
Y0 - ISO Factor2 N/A 2.5
Y1 - ISO Factor3 N/A 2.56
Y2 - ISO Factor4 N/A 3.81

Reference Thermal Speed Rating (Grease)

 N/A 6400 rpm
Reference Thermal Speed Rating (Oil)5 N/A 7900 rpm
Cg - Geometry Factor6 N/A 0.0441

Dimensions

D - Outer Diameter

 N/A 80 mm3.1496 in

B' - Inner Ring Width

 N/A 21 mm0.8268 in

B - Outer Ring Width

 N/A 21 mm0.8268 in

Abutment and Fillet Dimensions

R - Inner Ring "To Clear" Radius7 N/A 1.5 mm0.060 in
r - Outer Ring "To Clear" Radius8 N/A 1.5 mm0.06 in

da - Inner Ring Backing Diameter

 N/A 47 mm1.900 in

Da - Outer Ring Backing Diameter

 N/A 71.000 mm2.8000 in

Basic Load Ratings

C0 - Static Radial Rating

 N/A 90200 N20300 lbf

C1(2) - Dynamic Radial Rating (Two-Rows)

 N/A 77800 N17500 lbf
  • 1 These factors apply for both inch and metric calculations. Consult your Timken representative for instruction on use.
  • 2 These factors apply for both inch and metric calculations. See engineering
  • 3 These factors apply for both inch and metric calculations. Consult your Timken representative for instruction on use.
  • 4 These factors apply for both inch and metric calculations. Consult your Timken representative for instruction on use.
  • 5 See thermal speed ratings in the engineering section.
  • 6 Geometry constant for Lubrication Life Adjustment Factor a3l.
  • 7 Maximum housing fillet radius that bearing corners will clear.
  • 8 These maximum fillet radii will be cleared by the bearing corners.