CAD (0) ▾
  • Cart is empty
  1. Request CAD files
Key Features
    • Longer bearing life achieved from higher capacity (vs. competitors)
    • Longer lubrication life achieved from lower operating temperatures due to reduced internal friction and running torque from cage guided rollers
    • Better contaminant purging from slots on cage face helps extend bearing life
    • Greater fatigue strength and increased wear resistance provide tougher protection against shock and acceleration loading from a hardened steel cage
Request Information
Unit of Measure

Key Dimensions

Bore (d)

 N/A 50 mm

O.D. (D)

 N/A 110 mm4.3307 in

Width (B)

 N/A 27 mm1.0630 in

Dynamic Radial Load Rating - 1M Revs (C1)

 N/A 151000 N33800 lbf
e Factor1 N/A 0.24

Other Dimensions

Max Shaft Fillet Radius2 N/A 2.0 mm0.080 in

Shaft Backing Shoulder Diameter

 N/A 67.000 mm2.600 in

Housing Backing Shoulder Diameter

 N/A 99.000 mm3.900 in

Design Unit

 N/A Metric

Ratings

Static Radial Load Rating (C0)

 N/A 163000 N36700 lbf

Factors

Y0 Factor3 N/A 2.76
Y1 Factor 4 N/A 2.83
Y2 Factor5 N/A 4.21
Geometry Factor (Cg)6 N/A 0.0549

Maximum Operating Speed

 N/A 1060 rpm
  • 1 These factors apply for both inch and metric calculations. Consult your Timken representative for instruction on use.
  • 2 Maximum housing fillet radius that bearing corners will clear.
  • 3 These factors apply for both inch and metric calculations. See engineering
  • 4 These factors apply for both inch and metric calculations. Consult your Timken representative for instruction on use.
  • 5 These factors apply for both inch and metric calculations. Consult your Timken representative for instruction on use.
  • 6 Geometry constant for Lubrication Life Adjustment Factor a3l.