Menu
Batch CAD Cart (0) ▾
  • Cart is empty
  1. Click Here for Batch Download
Request Information Add to CAD Cart
When faced with flat horizontal or vertical faces, flange units offer a simple mounting solution. As with pillow block supports, flange units are produced with spherical location to accommodate standard bearing housings and provide easy initial alignment of shaft and equipment.

To facilitate positive location of the flange to the surface, the rear face is recessed (dimensions N & V). This allows for a spigot (Tolerance f8) to be located into the flange.

Bearing inspection is simply a matter of removing the top half of the flange and housing. Bearing replacement may also be achieved in the same manner if required.

When integrating flange units into new applications, it should be noted that a maximum radial load equivalent to 0.26Cor is permissible. A maximum axial load of 0.25Ca must also be taken into account for applications with thrust loading. Units for vertically oriented shafts may also need special consideration given to sealing arrangements.

As always, Timken will be happy to advise on any application issues.
Unit of Measure

Specifications

Shaft Size

 N/A 4.6875 in

Seal Type

 N/A Kevlar Packing Seal

Bearing Type

 N/A Split Cylindrical Expansion Type

Support Type

 N/A Round Flange

Series Type

 N/A Heavy Series

Bolt Size

 N/A 4 x M24

Bearing Number

 N/A HSE411BX

Housing

 N/A HSE411HX

Bearing - Housing - Seal

 N/A HSE411BXHKPS

Dimensions

Dimension T

 N/A 20.9 in530 mm

Dimension R

 N/A 18.1 in460 mm

Dimension P

 N/A 1.3 in34 mm

Dimension H

 N/A 4.8 in122 mm

Dimension N

 N/A 15.372 in390.45 mm

Dimension V

 N/A 0.3 in7 mm

Dimension L

 N/A 9.0000 in229 mm

Bearings Ratings

Cr - Dynamic Load Rating

 N/A 169281 lbf753000 N

Cor - Static Load Rating

 N/A 218964 lbf974000 N

Maximum Speed

 N/A 1500 rpm

Note

Note

 N/A Timken offers a wide range of sealing options including: KPS, RSS, ATL and HTPS seals.

Please review for more options.
By clicking Submit, you consent to the personal information you provide being used in the manner as described in our Privacy Notice, including access to that information by Timken personnel who may be located outside your home country. In addition, you agree that the CAD drawings are for your personal, one-time use only, and that you will not modify or create any compilation or derivative work using the CAD drawings or distribute or display the CAD drawings on any website or other media.