|
|
|
The L Type coupling consists of two standard L Type hubs and one spider.
|
|
|
|
|
|
|
|
|
|
|
|
|
Max. Bore (Dimensions ID1/ID2)
|
|
0.750 in
19.00 mm
|
|
|
|
|
|
|
|
|
- Bronze is a rigid, porous oil-impregnated
metal insert exclusively for slow speed (maximum 250
RPM) applications requiring high torque capabilities.
Bronze operations are not affected by extreme
temperatures, water, oil, or dirt.
|
|
|
|
Lovejoy offers four types of elastomer designs to allow for additional
flexibility in addressing specific application requirements. One piece designs
are used in the “L” and “AL” models (referred to as spiders) and multiple
part “load cushions” are used in the “C” and “H” model couplings. The load
cushions are in sets of 6 to 14 pieces depending on coupling size.
Solid Center Spider
- The solid center design is commonly used design when shafts of the
driver and driven equipment can be kept separate by a standard gap
Open Center Spider
- The open center design allows for the shafts of the driver and driven to
be positioned within a short distance
- Open center spiders offer shaft positioning flexibility but have a lower
RPM capacity (1,750 RPM maximum for NBR, 3,600 maximum for Urethane/Hytrel®)
Cushions
- Used exclusively for the C and H Type couplings
- Load cushions are held in place radially by a steel collar which is
attached to one of the hubs
Snap Wrap Flexible Spider
- Design allows for easy removal of the spider without moving the hubs
- Allows for close shaft separation all the way up to the hubs maximum
bore
- Maximum RPM is 1,750 RPM with the retaining ring, but if used with the
LC Type (with collar) the normal RPM rating of the coupling applies
- Style is available in NBR and Urethane only, and in limited sizes
|
|
|
|
|
|
|
|
