Menu
Batch CAD Cart (0) ▾
  • Cart is empty
  1. Click Here for Batch Download
Request Information Add to CAD Cart
Tapered Roller Bearings - 2TS-DM (Matched Bearing Assembly, Direct Mount)
Unit of Measure

Specifications

Cone Part Number

 N/A 11590

Cup Part Number

 N/A 11520

Related Assembly Number(s)

 N/A 11590-90012

Outer Spacer Part Number

 N/A Y2S-11520

Design Unit

 N/A Inch

Dimensions

d - Bore

 N/A 0.6250 in15.875 mm

D - Cup Outer Diameter

 N/A 1.6875 in42.863 mm

T - Width

 N/A 1.125 in28.575 mm

B - Width

 N/A 1.125 in28.575 mm

Abutment and Fillet Dimensions

R - Cone Backface "To Clear" Radius1 N/A 0.010 in0.3 mm
r - Cup Backface "To Clear" Radius2 N/A 0.06 in1.52 mm

db - Cone Backface Backing Diameter

 N/A 0.96 in24.5 mm

Da - Cup Frontface Backing Diameter

 N/A 1.59 in40.39 mm

Basic Load Ratings

C90 - Dynamic Radial Rating (90 million revolutions)3 N/A 1100 lbf4870 N
C1 - Dynamic Radial Rating (1 million revolutions)4 N/A 7360 lbf32700 N
Ca90 - Dynamic Thrust Rating (90 million revolutions)5 N/A 1320 lbf5860 N
C90(2) - Dynamic Radial Rating (Two-Row, 90 million revolutions)6 N/A 1910 lbf8490 N

Factors

K - Factor7 N/A 0.83
e - ISO Factor8 N/A 0.7
Y1 - ISO Factor9 N/A 0.96
Y2 - ISO Factor10 N/A 1.43
  • 1 These maximum fillet radii will be cleared by the bearing corners.
  • 2 These maximum fillet radii will be cleared by the bearing corners.
  • 3 Based on 90 x 106 revolutions L10 life, for The Timken Company life calculation method. C90 and Ca90 are radial and thrust values.
  • 4 Based on 1 x 106 revolutions L10 life, for the ISO life calculation method.
  • 5 Based on 90 x 106 revolutions L10 life, for The Timken Company life calculation method. C90 and Ca90 are radial and thrust values for a single-row, C90(2) is the two-row radial value.
  • 6 Based on 90 x 106 revolutions L10 life, for The Timken Company life calculation method. C90 and Ca90 are radial and thrust values for a single-row, C90(2) is the two-row radial value.
  • 7 These factors apply for both inch and metric calculations. Consult your Timken representative for instruction on use.
  • 8 These factors apply for both inch and metric calculations. Consult your Timken representative for instruction on use.
  • 9 These factors apply for both inch and metric calculations. Consult your Timken representative for instruction on use.
  • 10 These factors apply for both inch and metric calculations. Consult your Timken representative for instruction on use.
By clicking Submit, you consent to the personal information you provide being used in the manner as described in our Privacy Notice, including access to that information by Timken personnel who may be located outside your home country. In addition, you agree that the CAD drawings are for your personal, one-time use only, and that you will not modify or create any compilation or derivative work using the CAD drawings or distribute or display the CAD drawings on any website or other media.