Menu
Batch CAD Cart (0) ▾
  • Cart is empty
  1. Click Here for Batch Download
Request Information Add to CAD Cart
Tapered Roller Bearings - 2TS-DM (Matched Bearing Assembly, Direct Mount)
Unit of Measure

Specifications

Cone Part Number

 N/A EE113091

Cup Part Number

 N/A 113170

Related Assembly Number(s)

 N/A EE113091-902A1 EE113091-902A2

Outer Spacer Part Number

 N/A Y4S-113170

Design Unit

 N/A Inch

Dimensions

d - Bore

 N/A 8.9945 in228.460 mm

D - Cup Outer Diameter

 N/A 17.0000 in431.800 mm

T - Width

 N/A 7.2500 in184.150 mm

B - Width

 N/A 6.7500 in171.450 mm

Abutment and Fillet Dimensions

R - Cone Backface "To Clear" Radius1 N/A 0.13 in3.300 mm
r - Cup Backface "To Clear" Radius2 N/A 0.250 in6.35 mm

db - Cone Backface Backing Diameter

 N/A 10.79 in274 mm

Da - Cup Frontface Backing Diameter

 N/A 15.67 in397.30 mm

Basic Load Ratings

C90 - Dynamic Radial Rating (90 million revolutions)3 N/A 74300 lbf330000 N
C1 - Dynamic Radial Rating (1 million revolutions)4 N/A 499000 lbf2220000 N
Ca90 - Dynamic Thrust Rating (90 million revolutions)5 N/A 112000 lbf500000 N
C90(2) - Dynamic Radial Rating (Two-Row, 90 million revolutions)6 N/A 129000 lbf575000 N

Factors

K - Factor7 N/A 0.66
e - ISO Factor8 N/A 0.88
Y1 - ISO Factor9 N/A 0.76
Y2 - ISO Factor10 N/A 1.14
  • 1 These maximum fillet radii will be cleared by the bearing corners.
  • 2 These maximum fillet radii will be cleared by the bearing corners.
  • 3 Based on 90 x 106 revolutions L10 life, for The Timken Company life calculation method. C90 and Ca90 are radial and thrust values.
  • 4 Based on 1 x 106 revolutions L10 life, for the ISO life calculation method.
  • 5 Based on 90 x 106 revolutions L10 life, for The Timken Company life calculation method. C90 and Ca90 are radial and thrust values for a single-row, C90(2) is the two-row radial value.
  • 6 Based on 90 x 106 revolutions L10 life, for The Timken Company life calculation method. C90 and Ca90 are radial and thrust values for a single-row, C90(2) is the two-row radial value.
  • 7 These factors apply for both inch and metric calculations. Consult your Timken representative for instruction on use.
  • 8 These factors apply for both inch and metric calculations. Consult your Timken representative for instruction on use.
  • 9 These factors apply for both inch and metric calculations. Consult your Timken representative for instruction on use.
  • 10 These factors apply for both inch and metric calculations. Consult your Timken representative for instruction on use.
By clicking Submit, you consent to the personal information you provide being used in the manner as described in our Privacy Notice, including access to that information by Timken personnel who may be located outside your home country. In addition, you agree that the CAD drawings are for your personal, one-time use only, and that you will not modify or create any compilation or derivative work using the CAD drawings or distribute or display the CAD drawings on any website or other media.