CAD (0) ▾
  • Cart is empty
  1. Request CAD files
Request Information
Unit of Measure

Other Dimensions

Weight

 N/A 88.58 Kg195.27 lb

Width (T)

 N/A 6.8750 in174.625 mm

B - Width

 N/A 6 1/4 in158.75 mm
Max Shaft Fillet Radius1 N/A 0.06 in1.5 mm
Max Housing Fillet Radius2 N/A 0.06 in1.52 mm

Shaft Backing Shoulder Diameter - Backface (db)

 N/A 8.15 in207 mm

Housing Backing Shoulder Diameter - Frontface (Da)

 N/A 13.46 in341.88 mm

Key Dimensions

Cone Part Number

 N/A EE117063

Cup Part Number

 N/A 117148

Related Assembly Number(s)

 N/A EE117063-90012 EE117063-90016 EE117063-90023 EE117063-90024

Outer Spacer Part Number

 N/A Y3S-117148

Design Unit

 N/A Inch

Bore (d)

 N/A 6 3/8 in161.925 mm

O.D. (D)

 N/A 14.75 in374.65 mm
Dynamic Radial Load Rating - 90M Revs (C90) 3 N/A 77200 lbf343000 N
Dynamic Radial Load Rating 2-Row - 90M Revs (C90-2row)4 N/A 134000 lbf598000 N
K Factor 5 N/A 0.83
e Factor 6 N/A 0.71

Ratings

C1 - Dynamic Radial Rating (1 million revolutions)7 N/A 518000 lbf2300000 N
Ca90 - Dynamic Thrust Rating (90 million revolutions)8 N/A 93300 lbf415000 N

Factors

Y1 Factor 9 N/A 0.96
Y2 Factor 10 N/A 1.42
  • 1 These maximum fillet radii will be cleared by the bearing corners.
  • 2 These maximum fillet radii will be cleared by the bearing corners.
  • 3 Based on 90 x 106 revolutions L10 life, for The Timken Company life calculation method. C90 and Ca90 are radial and thrust values.
  • 4 Based on 90 x 106 revolutions L10 life, for The Timken Company life calculation method. C90 and Ca90 are radial and thrust values for a single-row, C90(2) is the two-row radial value.
  • 5 These factors apply for both inch and metric calculations. Consult your Timken representative for instruction on use.
  • 6 These factors apply for both inch and metric calculations. Consult your Timken representative for instruction on use.
  • 7 Based on 1 x 106 revolutions L10 life, for the ISO life calculation method.
  • 8 Based on 90 x 106 revolutions L10 life, for The Timken Company life calculation method. C90 and Ca90 are radial and thrust values for a single-row, C90(2) is the two-row radial value.
  • 9 These factors apply for both inch and metric calculations. Consult your Timken representative for instruction on use.
  • 10 These factors apply for both inch and metric calculations. Consult your Timken representative for instruction on use.