Montage of Timken Bearing Products
Batch CAD Cart (0) ▾
  • Cart is empty
  1. Click Here for Batch Download
Request Information Add to CAD Cart
Tapered Roller Bearings - 2TS-DM (Matched Bearing Assembly, Direct Mount)
Unit of Measure

Specifications

Cone Part Number

 N/A EE776420

Cup Part Number

 N/A 776520

Related Assembly Number(s)

 N/A EE776420-90015

Outer Spacer Part Number

 N/A Y2S-776520

Design Unit

 N/A Inch

Dimensions

d - Bore

 N/A 42.0000 in1066.800 mm

D - Cup Outer Diameter

 N/A 52.0000 in1320.800 mm

T - Width

 N/A 7.5 in190.5 mm

B - Width

 N/A 7 in177.8 mm

Abutment and Fillet Dimensions

R - Cone Backface "To Clear" Radius1 N/A 0.200 in5 mm
r - Cup Backface "To Clear" Radius2 N/A 0.250 in6.35 mm

db - Cone Backface Backing Diameter

 N/A 43.9 in1115 mm

Da - Cup Frontface Backing Diameter

 N/A 50.79 in1290.10 mm

Basic Load Ratings

C90 - Dynamic Radial Rating (90 million revolutions)3 N/A 155000 lbf691000 N
C1 - Dynamic Radial Rating (1 million revolutions)4 N/A 1040000 lbf4640000 N
Ca90 - Dynamic Thrust Rating (90 million revolutions)5 N/A 152000 lbf676000 N
C90(2) - Dynamic Radial Rating (Two-Row, 90 million revolutions)6 N/A 271000 lbf1200000 N

Factors

K - Factor7 N/A 1.02
e - ISO Factor8 N/A 0.57
Y1 - ISO Factor9 N/A 1.18
Y2 - ISO Factor10 N/A 1.76
  • 1 These maximum fillet radii will be cleared by the bearing corners.
  • 2 These maximum fillet radii will be cleared by the bearing corners.
  • 3 Based on 90 x 106 revolutions L10 life, for The Timken Company life calculation method. C90 and Ca90 are radial and thrust values.
  • 4 Based on 1 x 106 revolutions L10 life, for the ISO life calculation method.
  • 5 Based on 90 x 106 revolutions L10 life, for The Timken Company life calculation method. C90 and Ca90 are radial and thrust values for a single-row, C90(2) is the two-row radial value.
  • 6 Based on 90 x 106 revolutions L10 life, for The Timken Company life calculation method. C90 and Ca90 are radial and thrust values for a single-row, C90(2) is the two-row radial value.
  • 7 These factors apply for both inch and metric calculations. Consult your Timken representative for instruction on use.
  • 8 These factors apply for both inch and metric calculations. Consult your Timken representative for instruction on use.
  • 9 These factors apply for both inch and metric calculations. Consult your Timken representative for instruction on use.
  • 10 These factors apply for both inch and metric calculations. Consult your Timken representative for instruction on use.