CAD (0) ▾
  • Cart is empty
  1. Request CAD files
Request Information
Unit of Measure

Other Dimensions

Weight

 N/A 17.33 Kg38.21 lb

Width (T)

 N/A 4.375 in111.125 mm

B - Width

 N/A 4 1/8 in104.776 mm
Max Shaft Fillet Radius1 N/A 0.06 in1.5 mm
Max Housing Fillet Radius2 N/A 0.13 in3.3 mm

Shaft Backing Shoulder Diameter - Backface (db)

 N/A 5.47 in139 mm

Housing Backing Shoulder Diameter - Frontface (Da)

 N/A 8.11 in205.00 mm

Key Dimensions

Cone Part Number

 N/A H924045

Cup Part Number

 N/A H924010

Related Assembly Number(s)

 N/A H924045-90014 H924045-90015 H924045-90022 H924045-902A6

Outer Spacer Part Number

 N/A H924010EA

Design Unit

 N/A Inch

Bore (d)

 N/A 4.375 in111.125 mm

O.D. (D)

 N/A 8.4375 in214.313 mm
Dynamic Radial Load Rating - 90M Revs (C90) 3 N/A 32500 lbf144000 N
Dynamic Radial Load Rating 2-Row - 90M Revs (C90-2row)4 N/A 56500 lbf251000 N
K Factor 5 N/A 0.87
e Factor 6 N/A 0.67

Ratings

C1 - Dynamic Radial Rating (1 million revolutions)7 N/A 218000 lbf970000 N
Ca90 - Dynamic Thrust Rating (90 million revolutions)8 N/A 37500 lbf167000 N

Factors

Y1 Factor 9 N/A 1
Y2 Factor 10 N/A 1.49
  • 1 These maximum fillet radii will be cleared by the bearing corners.
  • 2 These maximum fillet radii will be cleared by the bearing corners.
  • 3 Based on 90 x 106 revolutions L10 life, for The Timken Company life calculation method. C90 and Ca90 are radial and thrust values.
  • 4 Based on 90 x 106 revolutions L10 life, for The Timken Company life calculation method. C90 and Ca90 are radial and thrust values for a single-row, C90(2) is the two-row radial value.
  • 5 These factors apply for both inch and metric calculations. Consult your Timken representative for instruction on use.
  • 6 These factors apply for both inch and metric calculations. Consult your Timken representative for instruction on use.
  • 7 Based on 1 x 106 revolutions L10 life, for the ISO life calculation method.
  • 8 Based on 90 x 106 revolutions L10 life, for The Timken Company life calculation method. C90 and Ca90 are radial and thrust values for a single-row, C90(2) is the two-row radial value.
  • 9 These factors apply for both inch and metric calculations. Consult your Timken representative for instruction on use.
  • 10 These factors apply for both inch and metric calculations. Consult your Timken representative for instruction on use.