CAD (0) ▾
  • Cart is empty
  1. Request CAD files
Request Information
Unit of Measure

Other Dimensions

Weight

 N/A 4.9 Kg10.8 lb

Width (T)

 N/A 2.8536 in72.481 mm

B - Width

 N/A 2.7560 in70 mm
Max Shaft Fillet Radius1 N/A 0.010 in0.3 mm
Max Housing Fillet Radius2 N/A 0.1 in2.54 mm

Shaft Backing Shoulder Diameter - Backface (db)

 N/A 4.53 in115 mm

Housing Backing Shoulder Diameter - Frontface (Da)

 N/A 5.91 in150.10 mm

Key Dimensions

Cone Part Number

 N/A JM720249

Cup Part Number

 N/A JM720210

Outer Spacer Part Number

 N/A M720210EB

Design Unit

 N/A Metric

Bore (d)

 N/A 3.937 in100 mm

O.D. (D)

 N/A 6.1024 in155 mm
Dynamic Radial Load Rating - 90M Revs (C90) 3 N/A 13500 lbf60000 N
Dynamic Radial Load Rating 2-Row - 90M Revs (C90-2row)4 N/A 23500 lbf104000 N
K Factor 5 N/A 1.24
e Factor 6 N/A 0.47

Ratings

C1 - Dynamic Radial Rating (1 million revolutions)7 N/A 90600 lbf403000 N
Ca90 - Dynamic Thrust Rating (90 million revolutions)8 N/A 10900 lbf48600 N

Factors

Y1 Factor 9 N/A 1.43
Y2 Factor 10 N/A 2.12
  • 1 These maximum fillet radii will be cleared by the bearing corners.
  • 2 These maximum fillet radii will be cleared by the bearing corners.
  • 3 Based on 90 x 106 revolutions L10 life, for The Timken Company life calculation method. C90 and Ca90 are radial and thrust values.
  • 4 Based on 90 x 106 revolutions L10 life, for The Timken Company life calculation method. C90 and Ca90 are radial and thrust values for a single-row, C90(2) is the two-row radial value.
  • 5 These factors apply for both inch and metric calculations. Consult your Timken representative for instruction on use.
  • 6 These factors apply for both inch and metric calculations. Consult your Timken representative for instruction on use.
  • 7 Based on 1 x 106 revolutions L10 life, for the ISO life calculation method.
  • 8 Based on 90 x 106 revolutions L10 life, for The Timken Company life calculation method. C90 and Ca90 are radial and thrust values for a single-row, C90(2) is the two-row radial value.
  • 9 These factors apply for both inch and metric calculations. Consult your Timken representative for instruction on use.
  • 10 These factors apply for both inch and metric calculations. Consult your Timken representative for instruction on use.