CAD (0) ▾
  • Cart is empty
  1. Request CAD files
Request Information
Unit of Measure

Other Dimensions

Weight

 N/A 111.23 Kg245.21 lb

Width (T)

 N/A 6.75 in171.45 mm

B - Width

 N/A 6 10/16 in168.276 mm
Max Shaft Fillet Radius1 N/A 0.06 in1.5 mm
Max Housing Fillet Radius2 N/A 0.13 in3.3 mm

Shaft Backing Shoulder Diameter - Backface (db)

 N/A 17.2 in437 mm

Housing Backing Shoulder Diameter - Frontface (Da)

 N/A 20.74 in526.8 mm

Key Dimensions

Cone Part Number

 N/A LM567949

Cup Part Number

 N/A LM567910

Related Assembly Number(s)

 N/A LM567949-90WA2 LM567949-90WA3 LM567949-90WA4 LM567949-90WA5

Outer Spacer Part Number

 N/A LM567910EA

Design Unit

 N/A Inch

Bore (d)

 N/A 16 in406.4 mm

O.D. (D)

 N/A 21.625 in549.275 mm
Dynamic Radial Load Rating - 90M Revs (C90) 3 N/A 83500 lbf371000 N
Dynamic Radial Load Rating 2-Row - 90M Revs (C90-2row)4 N/A 145000 lbf646000 N
K Factor 5 N/A 1.43
e Factor 6 N/A 0.41

Ratings

C1 - Dynamic Radial Rating (1 million revolutions)7 N/A 561000 lbf2490000 N
Ca90 - Dynamic Thrust Rating (90 million revolutions)8 N/A 58200 lbf259000 N

Factors

Y1 Factor 9 N/A 1.66
Y2 Factor 10 N/A 2.47
  • 1 These maximum fillet radii will be cleared by the bearing corners.
  • 2 These maximum fillet radii will be cleared by the bearing corners.
  • 3 Based on 90 x 106 revolutions L10 life, for The Timken Company life calculation method. C90 and Ca90 are radial and thrust values.
  • 4 Based on 90 x 106 revolutions L10 life, for The Timken Company life calculation method. C90 and Ca90 are radial and thrust values for a single-row, C90(2) is the two-row radial value.
  • 5 These factors apply for both inch and metric calculations. Consult your Timken representative for instruction on use.
  • 6 These factors apply for both inch and metric calculations. Consult your Timken representative for instruction on use.
  • 7 Based on 1 x 106 revolutions L10 life, for the ISO life calculation method.
  • 8 Based on 90 x 106 revolutions L10 life, for The Timken Company life calculation method. C90 and Ca90 are radial and thrust values for a single-row, C90(2) is the two-row radial value.
  • 9 These factors apply for both inch and metric calculations. Consult your Timken representative for instruction on use.
  • 10 These factors apply for both inch and metric calculations. Consult your Timken representative for instruction on use.