CAD (0) ▾
  • Cart is empty
  1. Request CAD files
Request Information
Unit of Measure

Other Dimensions

Weight

 N/A 86.31 Kg190.25 lb

Width (T)

 N/A 7.125 in180.975 mm

C - Width

 N/A 5.25 in133.35 mm
Max Shaft Fillet Radius1 N/A 0.25 in6.4 mm
Max Housing Fillet Radius2 N/A 0.06 in1.5 mm

Shaft Backing Shoulder Diameter - Backface (db)

 N/A 11.61 in295 mm

Housing Backing Shoulder Diameter - Frontface (Da)

 N/A 15.59 in395.99 mm

Key Dimensions

Cone Part Number

 N/A EE435102

Cup Part Number

 N/A 435165

Inner Spacer Part Number

 N/A X1S-435102

Outer Spacer Part Number

 N/A Y2S-435165

Design Unit

 N/A Inch

Bore (d)

 N/A 10.25 in260.35 mm

O.D. (D)

 N/A 16.5 in419.1 mm
Dynamic Radial Load Rating - 90M Revs (C90) 3 N/A 65500 lbf291000 N
Dynamic Radial Load Rating 2-Row - 90M Revs (C90-2row)4 N/A 114000 lbf507000 N
K Factor 5 N/A 0.97
e Factor 6 N/A 0.6

Ratings

C1 - Dynamic Radial Rating (1 million revolutions)7 N/A 440000 lbf1960000 N
Ca90 - Dynamic Thrust Rating (90 million revolutions)8 N/A 67800 lbf302000 N

Factors

Y1 Factor 9 N/A 1.12
Y2 Factor 10 N/A 1.66
  • 1 These maximum fillet radii will be cleared by the bearing corners.
  • 2 These maximum fillet radii will be cleared by the bearing corners.
  • 3 Based on 90 x 106 revolutions L10 life, for The Timken Company life calculation method. C90 and Ca90 are radial and thrust values.
  • 4 Based on 90 x 106 revolutions L10 life, for The Timken Company life calculation method. C90 and Ca90 are radial and thrust values for a single-row, C90(2) is the two-row radial value.
  • 5 These factors apply for both inch and metric calculations. Consult your Timken representative for instruction on use.
  • 6 These factors apply for both inch and metric calculations. Consult your Timken representative for instruction on use.
  • 7 Based on 1 x 106 revolutions L10 life, for the ISO life calculation method.
  • 8 Based on 90 x 106 revolutions L10 life, for The Timken Company life calculation method. C90 and Ca90 are radial and thrust values for a single-row, C90(2) is the two-row radial value.
  • 9 These factors apply for both inch and metric calculations. Consult your Timken representative for instruction on use.
  • 10 These factors apply for both inch and metric calculations. Consult your Timken representative for instruction on use.