CAD (0) ▾
  • Cart is empty
  1. Request CAD files
Request Information
Unit of Measure

Other Dimensions

Weight

 N/A 1.08 Kg2.38 lb

Width (T)

 N/A 1.9698 in50.033 mm

C - Width

 N/A 1.5928 in40.457 mm
Max Shaft Fillet Radius1 N/A 0.06 in1.5 mm
Max Housing Fillet Radius2 N/A 0.03 in0.8 mm

Shaft Backing Shoulder Diameter - Backface (db)

 N/A 2.8 in71 mm

Housing Backing Shoulder Diameter - Frontface (Da)

 N/A 3.62 in91.9 mm

Key Dimensions

Cone Part Number

 N/A L610549

Cup Part Number

 N/A L610510

Related Assembly Number(s)

 N/A 388A-90176

Inner Spacer Part Number

 N/A X1S-388A

Design Unit

 N/A Inch

Bore (d)

 N/A 2.5 in63.5 mm

O.D. (D)

 N/A 3.7188 in94.458 mm
Dynamic Radial Load Rating - 90M Revs (C90) 3 N/A 3910 lbf17400 N
Dynamic Radial Load Rating 2-Row - 90M Revs (C90-2row)4 N/A 6800 lbf30200 N
K Factor 5 N/A 1.38
e Factor 6 N/A 0.42

Ratings

C1 - Dynamic Radial Rating (1 million revolutions)7 N/A 26200 lbf117000 N
Ca90 - Dynamic Thrust Rating (90 million revolutions)8 N/A 2840 lbf12600 N

Factors

Y1 Factor 9 N/A 1.59
Y2 Factor 10 N/A 2.37
  • 1 These maximum fillet radii will be cleared by the bearing corners.
  • 2 These maximum fillet radii will be cleared by the bearing corners.
  • 3 Based on 90 x 106 revolutions L10 life, for The Timken Company life calculation method. C90 and Ca90 are radial and thrust values.
  • 4 Based on 90 x 106 revolutions L10 life, for The Timken Company life calculation method. C90 and Ca90 are radial and thrust values for a single-row, C90(2) is the two-row radial value.
  • 5 These factors apply for both inch and metric calculations. Consult your Timken representative for instruction on use.
  • 6 These factors apply for both inch and metric calculations. Consult your Timken representative for instruction on use.
  • 7 Based on 1 x 106 revolutions L10 life, for the ISO life calculation method.
  • 8 Based on 90 x 106 revolutions L10 life, for The Timken Company life calculation method. C90 and Ca90 are radial and thrust values for a single-row, C90(2) is the two-row radial value.
  • 9 These factors apply for both inch and metric calculations. Consult your Timken representative for instruction on use.
  • 10 These factors apply for both inch and metric calculations. Consult your Timken representative for instruction on use.