Montage of Timken Bearing Products
Batch CAD Cart (0) ▾
  • Cart is empty
  1. Click Here for Batch Download
Request Information Add to CAD Cart
Tapered Roller Bearings - 2TS-IM (Matched Bearing Assembly, Indirect Mount)
Unit of Measure

Specifications

Cone Part Number

 N/A LM12749

Cup Part Number

 N/A LM12711

Inner Spacer Part Number

 N/A K168902

Outer Spacer Part Number

 N/A K168901

Design Unit

 N/A Inch

Dimensions

d - Bore

 N/A 0.8656 in21.986 mm

D - Cup Outer Diameter

 N/A 1.8100 in45.974 mm

T - Width

 N/A 1.4367 in36.492 mm

C - Width

 N/A 1.1667 in29.634 mm

Abutment and Fillet Dimensions

R - Cone Backface "To Clear" Radius1 N/A 0.050 in1.270 mm
r - Cup Backface "To Clear" Radius2 N/A 0.020 in0.40 mm

db - Cone Backface Backing Diameter

 N/A 1.08 in27.5 mm

Da - Cup Frontface Backing Diameter

 N/A 1.69 in42.93 mm

Basic Load Ratings

C90 - Dynamic Radial Rating (90 million revolutions)3 N/A 2250 lbf10000 N
C1 - Dynamic Radial Rating (1 million revolutions)4 N/A 15100 lbf67200 N
Ca90 - Dynamic Thrust Rating (90 million revolutions)5 N/A 1180 lbf5250 N
C90(2) - Dynamic Radial Rating (Two-Row, 90 million revolutions)6 N/A 3920 lbf17400 N

Factors

K - Factor7 N/A 1.91
e - ISO Factor8 N/A 0.31
Y1 - ISO Factor9 N/A 2.21
Y2 - ISO Factor10 N/A 3.28
  • 1 These maximum fillet radii will be cleared by the bearing corners.
  • 2 These maximum fillet radii will be cleared by the bearing corners.
  • 3 Based on 90 x 106 revolutions L10 life, for The Timken Company life calculation method. C90 and Ca90 are radial and thrust values.
  • 4 Based on 1 x 106 revolutions L10 life, for the ISO life calculation method.
  • 5 Based on 90 x 106 revolutions L10 life, for The Timken Company life calculation method. C90 and Ca90 are radial and thrust values for a single-row, C90(2) is the two-row radial value.
  • 6 Based on 90 x 106 revolutions L10 life, for The Timken Company life calculation method. C90 and Ca90 are radial and thrust values for a single-row, C90(2) is the two-row radial value.
  • 7 These factors apply for both inch and metric calculations. Consult your Timken representative for instruction on use.
  • 8 These factors apply for both inch and metric calculations. Consult your Timken representative for instruction on use.
  • 9 These factors apply for both inch and metric calculations. Consult your Timken representative for instruction on use.
  • 10 These factors apply for both inch and metric calculations. Consult your Timken representative for instruction on use.