Aerospace / Military
Aerospace Series General Aviation Rod Ends Spherical Bearings Mil Spec Series Rod Ends Spherical Bearings Bushings Approved Part Numbers
Commercial / Industrial
Rod End Bearings Inch Rod Ends Metric Rod Ends Spherical Bearings Inch Spherical Bearings Metric Spherical Bearings
Technical Resources
Terms and Definitions Articles Technical Data FAQs Key Term Translation Custom Engineered Products
Online Catalog
Engineers power search our entire catalog of bearing and bushings, with access to every attribute and technical specification possible. View our online catalog...
Request Information
SR bearings are made to a standard setting range, based on Timken’s Set-Right™ automated setting technique, and are suitable for most industrial applications. They have two spacers and an optional snap-ring for axial location. Because both types are made from popular sizes of single-row bearings, they provide a low-cost choice for many applications.

Design Attributes:
  • Two TS bearings mounted indirectly with cone and cup spacers.
  • Cup spacer features lubrication slots to allow commercial snap rings to locate bearings axially.
  • Two J-Line™ Class N bearings with metric envelop and non-metric internal geometry.
Unit of Measure

Key Dimensions

Cone Part Number

 N/A HM88649

Cup Part Number

 N/A HM88610

Inner Spacer Part Number

 N/A K152757

Snap Ring Part Number

 N/A K152758

Bore (d)

 N/A 34.925 mm1 3/8 in

O.D. (D)

 N/A 72.233 mm2.8438 in

Width (T)

 N/A 55.73 mm2.1941 in
Dynamic Radial Load Rating - 1M Revs (C1)1 N/A 134000 N30100 lbf
Dynamic Radial Load Rating - 90M Revs (C90) 2 N/A 19900 N4480 lbf
Dynamic Radial Load Rating 2-Row - 90M Revs (C90-2row)3 N/A 34700 N7790 lbf
e Factor 4 N/A 0.55
K Factor 5 N/A 1.07

Other Dimensions

Weight

 N/A 1.03 Kg2.29 lb

Outer Ring Width (C)

 N/A 44.614 mm1.7565 in
Max Shaft Fillet Radius6 N/A 2.29 mm0.09 in
Max Housing Fillet Radius7 N/A 2.29 mm0.090 in

Shaft Backing Shoulder Dia. - Backface (db)

 N/A 48.5 mm1.91 in

Housing Backing Shoulder Dia. - Frontface (Da)

 N/A 69.1 mm2.74 in

Ratings

Dynamic Axial Rating - 90M Revs (Ca90)8 N/A 18600 N4180 lbf

Factors

Y1 Factor 9 N/A 1.24
Y2 Factor 10 N/A 1.84
  • 1 Based on 1 x 106 revolutions L10 life, for the ISO life calculation method.
  • 2 Based on 90 x 106 revolutions L10 life, for The Timken Company life calculation method. C90 and Ca90 are radial and thrust values.
  • 3 Based on 90 x 106 revolutions L10 life, for The Timken Company life calculation method. C90 and Ca90 are radial and thrust values for a single-row, C90(2) is the two-row radial value.
  • 4 These factors apply for both inch and metric calculations. Consult your Timken representative for instruction on use.
  • 5 These factors apply for both inch and metric calculations. Consult your Timken representative for instruction on use.
  • 6 These maximum fillet radii will be cleared by the bearing corners.
  • 7 These maximum fillet radii will be cleared by the bearing corners.
  • 8 Based on 90 x 106 revolutions L10 life, for The Timken Company life calculation method. C90 and Ca90 are radial and thrust values for a single-row, C90(2) is the two-row radial value.
  • 9 These factors apply for both inch and metric calculations. Consult your Timken representative for instruction on use.
  • 10 These factors apply for both inch and metric calculations. Consult your Timken representative for instruction on use.