Montage of Timken Bearing Products
Batch CAD Cart (0) ▾
  • Cart is empty
  1. Click Here for Batch Download
Request Information Add to CAD Cart
Tapered Roller Bearings - SR (Matched Bearing Assembly, SET-RIGHT™)
Unit of Measure

Specifications

Cone Part Number

 N/A JHM516849

Cup Part Number

 N/A JHM516810

Inner Spacer Part Number

 N/A JX8599AI

Outer Spacer Part Number

 N/A HM516810ES

Snap Ring Part Number

 N/A K518333R

Design Unit

 N/A Metric

Dimensions

d - Bore

 N/A 85 mm3.3465 in

D - Cup Outer Diameter

 N/A 140 mm5.5118 in

T - Width

 N/A 85.47 mm3.3649 in

C - Width

 N/A 70.47 mm2.7744 in

Abutment and Fillet Dimensions

R - Cone Backface "To Clear" Radius1 N/A 3.050 mm0.12 in
r - Cup Backface "To Clear" Radius2 N/A 1.0 mm0.04 in

db - Cone Backface Backing Diameter

 N/A 100 mm3.94 in

Da - Cup Frontface Backing Diameter

 N/A 134.87 mm5.31 in

Basic Load Ratings

C90 - Dynamic Radial Rating (90 million revolutions)3 N/A 73000 N16400 lbf
C1 - Dynamic Radial Rating (1 million revolutions)4 N/A 490000 N110000 lbf
Ca90 - Dynamic Thrust Rating (90 million revolutions)5 N/A 50900 N11400 lbf
C90(2) - Dynamic Radial Rating (Two-Row, 90 million revolutions)6 N/A 127000 N28600 lbf

Factors

K - Factor7 N/A 1.43
e - ISO Factor8 N/A 0.41
Y1 - ISO Factor9 N/A 1.66
Y2 - ISO Factor10 N/A 2.47
  • 1 These maximum fillet radii will be cleared by the bearing corners.
  • 2 These maximum fillet radii will be cleared by the bearing corners.
  • 3 Based on 90 x 106 revolutions L10 life, for The Timken Company life calculation method. C90 and Ca90 are radial and thrust values.
  • 4 Based on 1 x 106 revolutions L10 life, for the ISO life calculation method.
  • 5 Based on 90 x 106 revolutions L10 life, for The Timken Company life calculation method. C90 and Ca90 are radial and thrust values for a single-row, C90(2) is the two-row radial value.
  • 6 Based on 90 x 106 revolutions L10 life, for The Timken Company life calculation method. C90 and Ca90 are radial and thrust values for a single-row, C90(2) is the two-row radial value.
  • 7 These factors apply for both inch and metric calculations. Consult your Timken representative for instruction on use.
  • 8 These factors apply for both inch and metric calculations. Consult your Timken representative for instruction on use.
  • 9 These factors apply for both inch and metric calculations. Consult your Timken representative for instruction on use.
  • 10 These factors apply for both inch and metric calculations. Consult your Timken representative for instruction on use.