Aerospace / Military
Aerospace Series General Aviation Rod Ends Spherical Bearings Mil Spec Series Rod Ends Spherical Bearings Bushings Approved Part Numbers
Commercial / Industrial
Rod End Bearings Inch Rod Ends Metric Rod Ends Spherical Bearings Inch Spherical Bearings Metric Spherical Bearings
Technical Resources
Terms and Definitions Articles Technical Data FAQs Key Term Translation Custom Engineered Products
Online Catalog
Engineers power search our entire catalog of bearing and bushings, with access to every attribute and technical specification possible. View our online catalog...
Request Information
SR bearings are made to a standard setting range, based on Timken’s Set-Right™ automated setting technique, and are suitable for most industrial applications. They have two spacers and an optional snap-ring for axial location. Because both types are made from popular sizes of single-row bearings, they provide a low-cost choice for many applications.

Design Attributes:
  • Two TS bearings mounted indirectly with cone and cup spacers.
  • Cup spacer features lubrication slots to allow commercial snap rings to locate bearings axially.
  • Two J-Line™ Class N bearings with metric envelop and non-metric internal geometry.
Unit of Measure

Key Dimensions

Cone Part Number

 N/A JLM508748

Cup Part Number

 N/A JLM508710

Inner Spacer Part Number

 N/A LM508748XS

Outer Spacer Part Number

 N/A LM508710ES

Snap Ring Part Number

 N/A K518779R

Bore (d)

 N/A 60 mm2.3622 in

O.D. (D)

 N/A 95 mm3.7402 in

Width (T)

 N/A 54 mm2.126 in
Dynamic Radial Load Rating - 1M Revs (C1)1 N/A 170000 N38200 lbf
Dynamic Radial Load Rating - 90M Revs (C90) 2 N/A 25300 N5690 lbf
Dynamic Radial Load Rating 2-Row - 90M Revs (C90-2row)3 N/A 44000 N9900 lbf
e Factor 4 N/A 0.4
K Factor 5 N/A 1.45

Other Dimensions

Weight

 N/A 1.26 Kg2.77 lb

Outer Ring Width (C)

 N/A 43.491 mm1.7122 in
Max Shaft Fillet Radius6 N/A 5.080 mm0.200 in
Max Housing Fillet Radius7 N/A 0.5 mm0.02 in

Shaft Backing Shoulder Dia. - Backface (db)

 N/A 75 mm2.95 in

Housing Backing Shoulder Dia. - Frontface (Da)

 N/A 91.90 mm3.62 in

Ratings

Dynamic Axial Rating - 90M Revs (Ca90)8 N/A 17400 N3910 lbf

Factors

Y1 Factor 9 N/A 1.68
Y2 Factor 10 N/A 2.5
  • 1 Based on 1 x 106 revolutions L10 life, for the ISO life calculation method.
  • 2 Based on 90 x 106 revolutions L10 life, for The Timken Company life calculation method. C90 and Ca90 are radial and thrust values.
  • 3 Based on 90 x 106 revolutions L10 life, for The Timken Company life calculation method. C90 and Ca90 are radial and thrust values for a single-row, C90(2) is the two-row radial value.
  • 4 These factors apply for both inch and metric calculations. Consult your Timken representative for instruction on use.
  • 5 These factors apply for both inch and metric calculations. Consult your Timken representative for instruction on use.
  • 6 These maximum fillet radii will be cleared by the bearing corners.
  • 7 These maximum fillet radii will be cleared by the bearing corners.
  • 8 Based on 90 x 106 revolutions L10 life, for The Timken Company life calculation method. C90 and Ca90 are radial and thrust values for a single-row, C90(2) is the two-row radial value.
  • 9 These factors apply for both inch and metric calculations. Consult your Timken representative for instruction on use.
  • 10 These factors apply for both inch and metric calculations. Consult your Timken representative for instruction on use.