CAD (0) ▾
  • Cart is empty
  1. Request CAD files
Request Information
Unit of Measure

Other Dimensions

Weight

 N/A 1.87 Kg4.12 lb

Width (T)

 N/A 56 mm2.2047 in

C - Width

 N/A 43.502 mm1.7126 in
Max Shaft Fillet Radius1 N/A 3.050 mm0.12 in
Max Housing Fillet Radius2 N/A 0.5 mm0.02 in

Shaft Backing Shoulder Diameter - Backface (db)

 N/A 88 mm3.46 in

Housing Backing Shoulder Diameter - Frontface (Da)

 N/A 111.00 mm4.37 in

Key Dimensions

Cone Part Number

 N/A JLM714149

Cup Part Number

 N/A JLM714110

Inner Spacer Part Number

 N/A LM714149XS

Outer Spacer Part Number

 N/A LM714110ES

Snap Ring Part Number

 N/A K524105R

Design Unit

 N/A Metric

Bore (d)

 N/A 75 mm2.9528 in

O.D. (D)

 N/A 115 mm4.5276 in
Dynamic Radial Load Rating - 90M Revs (C90) 3 N/A 36400 N8180 lbf
Dynamic Radial Load Rating 2-Row - 90M Revs (C90-2row)4 N/A 63400 N14200 lbf
K Factor 5 N/A 1.27
e Factor 6 N/A 0.46

Ratings

C1 - Dynamic Radial Rating (1 million revolutions)7 N/A 244000 N54900 lbf
Ca90 - Dynamic Thrust Rating (90 million revolutions)8 N/A 28600 N6420 lbf

Factors

Y1 Factor 9 N/A 1.47
Y2 Factor 10 N/A 2.19
  • 1 These maximum fillet radii will be cleared by the bearing corners.
  • 2 These maximum fillet radii will be cleared by the bearing corners.
  • 3 Based on 90 x 106 revolutions L10 life, for The Timken Company life calculation method. C90 and Ca90 are radial and thrust values.
  • 4 Based on 90 x 106 revolutions L10 life, for The Timken Company life calculation method. C90 and Ca90 are radial and thrust values for a single-row, C90(2) is the two-row radial value.
  • 5 These factors apply for both inch and metric calculations. Consult your Timken representative for instruction on use.
  • 6 These factors apply for both inch and metric calculations. Consult your Timken representative for instruction on use.
  • 7 Based on 1 x 106 revolutions L10 life, for the ISO life calculation method.
  • 8 Based on 90 x 106 revolutions L10 life, for The Timken Company life calculation method. C90 and Ca90 are radial and thrust values for a single-row, C90(2) is the two-row radial value.
  • 9 These factors apply for both inch and metric calculations. Consult your Timken representative for instruction on use.
  • 10 These factors apply for both inch and metric calculations. Consult your Timken representative for instruction on use.