CAD (0) ▾
  • Cart is empty
  1. Request CAD files
Request Information
Unit of Measure

Other Dimensions

Weight

 N/A 4.59 Kg10.11 lb

Width (T)

 N/A 78.974 mm3.1092 in

C - Width

 N/A 62.489 mm2.4602 in
Max Shaft Fillet Radius1 N/A 3.050 mm0.12 in
Max Housing Fillet Radius2 N/A 1.0 mm0.04 in

Shaft Backing Shoulder Diameter - Backface (db)

 N/A 106 mm4.17 in

Housing Backing Shoulder Diameter - Frontface (Da)

 N/A 138.94 mm5.47 in

Key Dimensions

Cone Part Number

 N/A JM718149

Cup Part Number

 N/A JM718110

Inner Spacer Part Number

 N/A M718149XS

Outer Spacer Part Number

 N/A M718110ES

Snap Ring Part Number

 N/A K524653R

Design Unit

 N/A Metric

Bore (d)

 N/A 90 mm3.5433 in

O.D. (D)

 N/A 145 mm5.7087 in
Dynamic Radial Load Rating - 90M Revs (C90) 3 N/A 57700 N13000 lbf
Dynamic Radial Load Rating 2-Row - 90M Revs (C90-2row)4 N/A 100000 N22600 lbf
K Factor 5 N/A 1.31
e Factor 6 N/A 0.44

Ratings

C1 - Dynamic Radial Rating (1 million revolutions)7 N/A 387000 N87000 lbf
Ca90 - Dynamic Thrust Rating (90 million revolutions)8 N/A 43900 N9860 lbf

Factors

Y1 Factor 9 N/A 1.52
Y2 Factor 10 N/A 2.26
  • 1 These maximum fillet radii will be cleared by the bearing corners.
  • 2 These maximum fillet radii will be cleared by the bearing corners.
  • 3 Based on 90 x 106 revolutions L10 life, for The Timken Company life calculation method. C90 and Ca90 are radial and thrust values.
  • 4 Based on 90 x 106 revolutions L10 life, for The Timken Company life calculation method. C90 and Ca90 are radial and thrust values for a single-row, C90(2) is the two-row radial value.
  • 5 These factors apply for both inch and metric calculations. Consult your Timken representative for instruction on use.
  • 6 These factors apply for both inch and metric calculations. Consult your Timken representative for instruction on use.
  • 7 Based on 1 x 106 revolutions L10 life, for the ISO life calculation method.
  • 8 Based on 90 x 106 revolutions L10 life, for The Timken Company life calculation method. C90 and Ca90 are radial and thrust values for a single-row, C90(2) is the two-row radial value.
  • 9 These factors apply for both inch and metric calculations. Consult your Timken representative for instruction on use.
  • 10 These factors apply for both inch and metric calculations. Consult your Timken representative for instruction on use.