CAD (0) ▾
  • Cart is empty
  1. Request CAD files
Request Information
Unit of Measure

Other Dimensions

Weight

 N/A 5 Kg11.01 lb

Width (T)

 N/A 80 mm3.1496 in

C - Width

 N/A 63.417 mm2.4967 in
Max Shaft Fillet Radius1 N/A 3.050 mm0.12 in
Max Housing Fillet Radius2 N/A 0.8 mm0.03 in

Shaft Backing Shoulder Diameter - Backface (db)

 N/A 115 mm4.53 in

Housing Backing Shoulder Diameter - Frontface (Da)

 N/A 150.10 mm5.91 in

Key Dimensions

Cone Part Number

 N/A JM720249

Cup Part Number

 N/A JM720210

Inner Spacer Part Number

 N/A JXH10010A

Outer Spacer Part Number

 N/A M720210ES

Snap Ring Part Number

 N/A K516800R

Design Unit

 N/A Metric

Bore (d)

 N/A 100 mm3.937 in

O.D. (D)

 N/A 155 mm6.1024 in
Dynamic Radial Load Rating - 90M Revs (C90) 3 N/A 60000 N13500 lbf
Dynamic Radial Load Rating 2-Row - 90M Revs (C90-2row)4 N/A 104000 N23500 lbf
K Factor 5 N/A 1.24
e Factor 6 N/A 0.47

Ratings

C1 - Dynamic Radial Rating (1 million revolutions)7 N/A 403000 N90600 lbf
Ca90 - Dynamic Thrust Rating (90 million revolutions)8 N/A 48600 N10900 lbf

Factors

Y1 Factor 9 N/A 1.43
Y2 Factor 10 N/A 2.12
  • 1 These maximum fillet radii will be cleared by the bearing corners.
  • 2 These maximum fillet radii will be cleared by the bearing corners.
  • 3 Based on 90 x 106 revolutions L10 life, for The Timken Company life calculation method. C90 and Ca90 are radial and thrust values.
  • 4 Based on 90 x 106 revolutions L10 life, for The Timken Company life calculation method. C90 and Ca90 are radial and thrust values for a single-row, C90(2) is the two-row radial value.
  • 5 These factors apply for both inch and metric calculations. Consult your Timken representative for instruction on use.
  • 6 These factors apply for both inch and metric calculations. Consult your Timken representative for instruction on use.
  • 7 Based on 1 x 106 revolutions L10 life, for the ISO life calculation method.
  • 8 Based on 90 x 106 revolutions L10 life, for The Timken Company life calculation method. C90 and Ca90 are radial and thrust values for a single-row, C90(2) is the two-row radial value.
  • 9 These factors apply for both inch and metric calculations. Consult your Timken representative for instruction on use.
  • 10 These factors apply for both inch and metric calculations. Consult your Timken representative for instruction on use.