CAD (0) ▾
  • Cart is empty
  1. Request CAD files
Request Information
Unit of Measure

Other Dimensions

Weight

 N/A 5.29 Kg11.7 lb

Width (T)

 N/A 79.756 mm3.1401 in

C - Width

 N/A 62.413 mm2.4572 in
Max Shaft Fillet Radius1 N/A 3.050 mm0.12 in
Max Housing Fillet Radius2 N/A 0.8 mm0.03 in

Shaft Backing Shoulder Diameter - Backface (db)

 N/A 125 mm4.92 in

Housing Backing Shoulder Diameter - Frontface (Da)

 N/A 160 mm6.3 in

Key Dimensions

Cone Part Number

 N/A JM822049

Cup Part Number

 N/A JM822010

Inner Spacer Part Number

 N/A JXH11010A

Outer Spacer Part Number

 N/A M822010ES

Snap Ring Part Number

 N/A K524660R

Design Unit

 N/A Metric

Bore (d)

 N/A 110 mm4.3307 in

O.D. (D)

 N/A 165 mm6.4961 in
Dynamic Radial Load Rating - 90M Revs (C90) 3 N/A 58900 N13200 lbf
Dynamic Radial Load Rating 2-Row - 90M Revs (C90-2row)4 N/A 103000 N23100 lbf
K Factor 5 N/A 1.18
e Factor 6 N/A 0.5

Ratings

C1 - Dynamic Radial Rating (1 million revolutions)7 N/A 396000 N88900 lbf
Ca90 - Dynamic Thrust Rating (90 million revolutions)8 N/A 50100 N11300 lbf

Factors

Y1 Factor 9 N/A 1.36
Y2 Factor 10 N/A 2.02
  • 1 These maximum fillet radii will be cleared by the bearing corners.
  • 2 These maximum fillet radii will be cleared by the bearing corners.
  • 3 Based on 90 x 106 revolutions L10 life, for The Timken Company life calculation method. C90 and Ca90 are radial and thrust values.
  • 4 Based on 90 x 106 revolutions L10 life, for The Timken Company life calculation method. C90 and Ca90 are radial and thrust values for a single-row, C90(2) is the two-row radial value.
  • 5 These factors apply for both inch and metric calculations. Consult your Timken representative for instruction on use.
  • 6 These factors apply for both inch and metric calculations. Consult your Timken representative for instruction on use.
  • 7 Based on 1 x 106 revolutions L10 life, for the ISO life calculation method.
  • 8 Based on 90 x 106 revolutions L10 life, for The Timken Company life calculation method. C90 and Ca90 are radial and thrust values for a single-row, C90(2) is the two-row radial value.
  • 9 These factors apply for both inch and metric calculations. Consult your Timken representative for instruction on use.
  • 10 These factors apply for both inch and metric calculations. Consult your Timken representative for instruction on use.