Aerospace / Military
Aerospace Series General Aviation Rod Ends Spherical Bearings Mil Spec Series Rod Ends Spherical Bearings Bushings Approved Part Numbers
Commercial / Industrial
Rod End Bearings Inch Rod Ends Metric Rod Ends Spherical Bearings Inch Spherical Bearings Metric Spherical Bearings
Technical Resources
Terms and Definitions Articles Technical Data FAQs Key Term Translation Custom Engineered Products
Online Catalog
Engineers power search our entire catalog of bearing and bushings, with access to every attribute and technical specification possible. View our online catalog...
Request Information
SR bearings are made to a standard setting range, based on Timken’s Set-Right™ automated setting technique, and are suitable for most industrial applications. They have two spacers and an optional snap-ring for axial location. Because both types are made from popular sizes of single-row bearings, they provide a low-cost choice for many applications.

Design Attributes:
  • Two TS bearings mounted indirectly with cone and cup spacers.
  • Cup spacer features lubrication slots to allow commercial snap rings to locate bearings axially.
  • Two J-Line™ Class N bearings with metric envelop and non-metric internal geometry.
Unit of Measure

Key Dimensions

Cone Part Number

 N/A JW4549

Cup Part Number

 N/A JW4510

Inner Spacer Part Number

 N/A K983135

Outer Spacer Part Number

 N/A K998908

Snap Ring Part Number

 N/A K928956

Bore (d)

 N/A 45 mm1.7717 in

O.D. (D)

 N/A 95 mm3.7402 in

Width (T)

 N/A 64 mm2.5197 in
Dynamic Radial Load Rating - 1M Revs (C1)1 N/A 206000 N46300 lbf
Dynamic Radial Load Rating - 90M Revs (C90) 2 N/A 30700 N6900 lbf
Dynamic Radial Load Rating 2-Row - 90M Revs (C90-2row)3 N/A 53400 N12000 lbf
e Factor 4 N/A 0.87
K Factor 5 N/A 0.67

Other Dimensions

Weight

 N/A 1.97 Kg4.37 lb

Outer Ring Width (C)

 N/A 46 mm1.811 in
Max Shaft Fillet Radius6 N/A 2.540 mm0.100 in
Max Housing Fillet Radius7 N/A 0.3 mm0.01 in

Shaft Backing Shoulder Dia. - Backface (db)

 N/A 64 mm2.52 in

Housing Backing Shoulder Dia. - Frontface (Da)

 N/A 90.90 mm3.58 in

Ratings

Dynamic Axial Rating - 90M Revs (Ca90)8 N/A 45500 N10200 lbf

Factors

Y1 Factor 9 N/A 0.78
Y2 Factor 10 N/A 1.16
  • 1 Based on 1 x 106 revolutions L10 life, for the ISO life calculation method.
  • 2 Based on 90 x 106 revolutions L10 life, for The Timken Company life calculation method. C90 and Ca90 are radial and thrust values.
  • 3 Based on 90 x 106 revolutions L10 life, for The Timken Company life calculation method. C90 and Ca90 are radial and thrust values for a single-row, C90(2) is the two-row radial value.
  • 4 These factors apply for both inch and metric calculations. Consult your Timken representative for instruction on use.
  • 5 These factors apply for both inch and metric calculations. Consult your Timken representative for instruction on use.
  • 6 These maximum fillet radii will be cleared by the bearing corners.
  • 7 These maximum fillet radii will be cleared by the bearing corners.
  • 8 Based on 90 x 106 revolutions L10 life, for The Timken Company life calculation method. C90 and Ca90 are radial and thrust values for a single-row, C90(2) is the two-row radial value.
  • 9 These factors apply for both inch and metric calculations. Consult your Timken representative for instruction on use.
  • 10 These factors apply for both inch and metric calculations. Consult your Timken representative for instruction on use.