All Product Types > ENGINEERED BEARINGS > Tapered Roller Bearings > Tapered Roller Bearings - Single Cones > Tapered Roller Bearings - Single Cones - Metric > Part Number JL730646  

Part Number JL730646, Tapered Roller Bearings - Single Cones - Metric

    Download PDF Download PDF   
    border="0" Printable Page  
    Email Email This Page  
    Save To Favorites Save To Favorites
  

This is the most basic and most widely used type of tapered roller bearing. It consists of two main separable parts: the cone (inner ring) assembly and the cup (outer ring). It is typically mounted in opposing pairs on a shaft.




Specifications  · Dimensions  · Abutment and Fillet Dimensions  · Basic Load Ratings  · Factors

Specifications

Series
L730600

Cone Part Number
JL730646

Design Units
METRIC

Cage Type
Stamped Steel

C1 - Dynamic Radial Rating (Two-Row, 1 million revolutions)1
337000 N
75800 lbf

C90(2) - Dynamic Radial Rating (Two-Row, 90 million revolutions)2
87400 N
19700 lbf

Full Timken Part Number
L730600
1 Based on 1 x 106 revolutions L10 life, for the ISO life calculation method.
2 Based on 90 x 106 revolutions L10 life, for The Timken Company life calculation method. C90 and Ca90 are radial and thrust values for a single-row, C90(2) is the two-row radial value.


Dimensions

d - Cone Bore
150 mm
5.9055 in

B - Cone Width
28.575 mm
1.1250 in


Abutment and Fillet Dimensions

R - Cone Backface "To Clear" Radius1
3.300 mm
0.13 in

da - Cone Frontface Backing Diameter
158 mm
6.22 in

db - Cone Backface Backing Diameter
164 mm
6.46 in

Ab - Cage-Cone Frontface Clearance
2 mm
0.08 in

Aa - Cage-Cone Backface Clearance
2 mm
0.08 in

a - Effective Center Location2
11.4 mm
0.45 in
1 These maximum fillet radii will be cleared by the bearing corners.
2 Negative value indicates effective center inside cone backface.


Basic Load Ratings

C90 - Dynamic Radial Rating (90 million revolutions)1
50200 N
11300 lbf

C1 - Dynamic Radial Rating (1 million revolutions)2
194000 N
43500 lbf

C0 - Static Radial Rating
339000 N
76100 lbf

Ca90 - Dynamic Thrust Rating (90 million revolutions)3
39400 N
8860 lbf
1 Based on 90 x 106 revolutions L10 life, for The Timken Company life calculation method. C90 and Ca90 are radial and thrust values.
2 Based on 1 x 106 revolutions L10 life, for the ISO life calculation method.
3 Based on 90 x 106 revolutions L10 life, for The Timken Company life calculation method. C90 and Ca90 are radial and thrust values for a single-row, C90(2) is the two-row radial value.


Factors

K - Factor1
1.27

G1 - Heat Generation Factor (Roller-Raceway)
295

G2 - Heat Generation Factor (Rib-Roller End)
103

Cg - Geometry Factor2
0.176
1 These factors apply for both inch and metric calculations. Consult your Timken representative for instruction on use.
2 Geometry constant for Lubrication Life Adjustment Factor a3l.



 DOWNLOADS 

Tapered Roller Bearing Engineering Information
(PDF, 663KB)

Bearing Life Calculation Tool

Bearing Dimensional Tolerances