Montage of Timken Bearing Products
Search Catalog
        
 All Product Types    Tapered Roller Bearings - Single Cones - Imperial
View Cart View RFQs Express Ordering  | Shipping 
 | Tax 
 | Terms
 Shopping Cart 0 Items
 Request for Quote 0 Items
All Product Types > ENGINEERED BEARINGS > Tapered Roller Bearings > Tapered Roller Bearings - Single Cones > Tapered Roller Bearings - Single Cones - Imperial > Part Number 02875  
Download PDF Download PDF     Printable Page     Email Email This Page     Save To Favorites Save To Favorites
Add To Cart Request Quote

Part Number 02875, Tapered Roller Bearings - Single Cones - Imperial



This is the most basic and most widely used type of tapered roller bearing. It consists of two main separable parts: the cone (inner ring) assembly and the cup (outer ring). It is typically mounted in opposing pairs on a shaft.



Unit of Measure: Imperial Metric Both

Specifications  · Dimensions  · Abutment and Fillet Dimensions  · Basic Load Ratings  · Factors

Specifications

Series

02800

Cone Part Number

02875

Design Units

Imperial

Cage Type

Stamped Steel

C1 - Dynamic Radial Rating (Two-Row, 1 million revolutions)1

25700 lbf
114000
N

C90(2) - Dynamic Radial Rating (Two-Row, 90 million revolutions)2

6670 lbf
29700
N
1 Based on 1 x 106 revolutions L10 life, for the ISO life calculation method.
2 Based on 90 x 106 revolutions L10 life, for The Timken Company life calculation method. C90 and Ca90 are radial and thrust values for a single-row, C90(2) is the two-row radial value.


Dimensions

d - Cone Bore

1 1/4 in
31.750
mm

B - Cone Width

0.875 in
22.225
mm


Abutment and Fillet Dimensions

R - Cone Backface "To Clear" Radius1

0.03 in
0.800
mm

da - Cone Frontface Backing Diameter

1.56 in
39.5
mm

db - Cone Backface Backing Diameter

1.79 in
45.5
mm

Ab - Cage-Cone Frontface Clearance

0.07 in
1.8
mm

Aa - Cage-Cone Backface Clearance

0.03 in
0.8
mm

a - Effective Center Location2

-0.15 in
-3.8
mm
1 These maximum fillet radii will be cleared by the bearing corners.
2 Negative value indicates effective center inside cone backface.


Basic Load Ratings

C90 - Dynamic Radial Rating (90 million revolutions)1

3830 lbf
17000
N

C1 - Dynamic Radial Rating (1 million revolutions)2

14800 lbf
65700
N

C0 - Static Radial Rating

16800 lbf
74900
N

Ca90 - Dynamic Thrust Rating (90 million revolutions)3

2980 lbf
13200
N
1 Based on 90 x 106 revolutions L10 life, for The Timken Company life calculation method. C90 and Ca90 are radial and thrust values.
2 Based on 1 x 106 revolutions L10 life, for the ISO life calculation method.
3 Based on 90 x 106 revolutions L10 life, for The Timken Company life calculation method. C90 and Ca90 are radial and thrust values for a single-row, C90(2) is the two-row radial value.


Factors

K - Factor1

1.29

G1 - Heat Generation Factor (Roller-Raceway)

20.6

G2 - Heat Generation Factor (Rib-Roller End)

10.1

Cg - Geometry Factor2

0.074
1 These factors apply for both inch and metric calculations. Consult your Timken representative for instruction on use.
2 Geometry constant for Lubrication Life Adjustment Factor a3l.



 DOWNLOADS 

Tapered Roller Bearing Engineering Information
(PDF, 663KB)

Bearing Life Calculation Tool

Bearing Dimensional Tolerances


Add To Cart Request Quote
<