All Product Types > ENGINEERED BEARINGS > Tapered Roller Bearings > Tapered Roller Bearings - Single Cones > Tapered Roller Bearings - Single Cones - Imperial > Part Number 96825  

Part Number 96825, Tapered Roller Bearings - Single Cones - Imperial

    Download PDF Download PDF   
    border="0" Printable Page  
    Email Email This Page  
    Save To Favorites Save To Favorites
  

This is the most basic and most widely used type of tapered roller bearing. It consists of two main separable parts: the cone (inner ring) assembly and the cup (outer ring). It is typically mounted in opposing pairs on a shaft.




Specifications  · Dimensions  · Abutment and Fillet Dimensions  · Basic Load Ratings  · Factors

Specifications

Series
96000

Cone Part Number
96825

Design Units
Imperial

Cage Type
Stamped Steel

C1 - Dynamic Radial Rating (Two-Row, 1 million revolutions)1
297000 lbf
1320000 N

C90(2) - Dynamic Radial Rating (Two-Row, 90 million revolutions)2
77000 lbf
343000 N
1 Based on 1 x 106 revolutions L10 life, for the ISO life calculation method.
2 Based on 90 x 106 revolutions L10 life, for The Timken Company life calculation method. C90 and Ca90 are radial and thrust values for a single-row, C90(2) is the two-row radial value.


Dimensions

d - Cone Bore
8.2500 in
209.550 mm

B - Cone Width
2.6250 in
66.675 mm


Abutment and Fillet Dimensions

R - Cone Backface "To Clear" Radius1
0.280 in
7.100 mm

da - Cone Frontface Backing Diameter
9.25 in
235 mm

db - Cone Backface Backing Diameter
9.69 in
246 mm

Ab - Cage-Cone Frontface Clearance
0.2 in
5.1 mm

Aa - Cage-Cone Backface Clearance
0.43 in
10.9 mm

a - Effective Center Location2
0.67 in
17 mm
1 These maximum fillet radii will be cleared by the bearing corners.
2 Negative value indicates effective center inside cone backface.


Basic Load Ratings

C90 - Dynamic Radial Rating (90 million revolutions)1
44200 lbf
197000 N

C1 - Dynamic Radial Rating (1 million revolutions)2
171000 lbf
759000 N

C0 - Static Radial Rating
319000 lbf
1420000 N

Ca90 - Dynamic Thrust Rating (90 million revolutions)3
44700 lbf
199000 N
1 Based on 90 x 106 revolutions L10 life, for The Timken Company life calculation method. C90 and Ca90 are radial and thrust values.
2 Based on 1 x 106 revolutions L10 life, for the ISO life calculation method.
3 Based on 90 x 106 revolutions L10 life, for The Timken Company life calculation method. C90 and Ca90 are radial and thrust values for a single-row, C90(2) is the two-row radial value.


Factors

K - Factor1
0.99

G1 - Heat Generation Factor (Roller-Raceway)
1140

G2 - Heat Generation Factor (Rib-Roller End)
160

Cg - Geometry Factor2
0.163
1 These factors apply for both inch and metric calculations. Consult your Timken representative for instruction on use.
2 Geometry constant for Lubrication Life Adjustment Factor a3l.



 DOWNLOADS 

Tapered Roller Bearing Engineering Information
(PDF, 663KB)

Bearing Life Calculation Tool

Bearing Dimensional Tolerances