Montage of Timken Bearing Products 
Search Catalog
        
 All Product Types    Tapered Roller Bearings - Single Cones - Imperial
View Cart View RFQs Express Ordering  | Shipping 
 | Tax 
 | Terms
 Shopping Cart 0 Items
 Request for Quote 0 Items
All Product Types > ENGINEERED BEARINGS > Tapered Roller Bearings > Tapered Roller Bearings - Single Cones > Tapered Roller Bearings - Single Cones - Imperial > Part Number EE153050  
Download PDF Download PDF     Printable Page     Email Email This Page     Save To Favorites Save To Favorites
Add To Cart Request Quote

Part Number EE153050, Tapered Roller Bearings - Single Cones - Imperial


This is the most basic and most widely used type of tapered roller bearing. It consists of two main separable parts: the cone (inner ring) assembly and the cup (outer ring). It is typically mounted in opposing pairs on a shaft.



Unit of Measure: Imperial Metric Both

Specifications  · Dimensions  · Abutment and Fillet Dimensions  · Basic Load Ratings  · Factors

Specifications

Series
153000

Cone Part Number
EE153050

Design Units
Imperial

Cage Type
Stamped Steel

C1 - Dynamic Radial Rating (Two-Row, 1 million revolutions)1
278000 lbf
1240000 N

C90(2) - Dynamic Radial Rating (Two-Row, 90 million revolutions)2
72100 lbf
321000 N
1 Based on 1 x 106 revolutions L10 life, for the ISO life calculation method.
2 Based on 90 x 106 revolutions L10 life, for The Timken Company life calculation method. C90 and Ca90 are radial and thrust values for a single-row, C90(2) is the two-row radial value.


Dimensions

d - Cone Bore
5 in
127 mm

B - Cone Width
3.2500 in
82.550 mm


Abutment and Fillet Dimensions

R - Cone Backface "To Clear" Radius1
0.380 in
9.700 mm

da - Cone Frontface Backing Diameter
5.87 in
149 mm

db - Cone Backface Backing Diameter
6.5 in
165 mm

Ab - Cage-Cone Frontface Clearance
-0.08 in
-2 mm

Aa - Cage-Cone Backface Clearance
0.45 in
11.4 mm

a - Effective Center Location2
-0.97 in
-24.6 mm
1 These maximum fillet radii will be cleared by the bearing corners.
2 Negative value indicates effective center inside cone backface.


Basic Load Ratings

C90 - Dynamic Radial Rating (90 million revolutions)1
41400 lbf
184000 N

C1 - Dynamic Radial Rating (1 million revolutions)2
160000 lbf
711000 N

C0 - Static Radial Rating
232000 lbf
1030000 N

Ca90 - Dynamic Thrust Rating (90 million revolutions)3
22800 lbf
101000 N
1 Based on 90 x 106 revolutions L10 life, for The Timken Company life calculation method. C90 and Ca90 are radial and thrust values.
2 Based on 1 x 106 revolutions L10 life, for the ISO life calculation method.
3 Based on 90 x 106 revolutions L10 life, for The Timken Company life calculation method. C90 and Ca90 are radial and thrust values for a single-row, C90(2) is the two-row radial value.


Factors

K - Factor1
1.82

G1 - Heat Generation Factor (Roller-Raceway)
490.5

G2 - Heat Generation Factor (Rib-Roller End)
65.1

Cg - Geometry Factor2
0.129
1 These factors apply for both inch and metric calculations. Consult your Timken representative for instruction on use.
2 Geometry constant for Lubrication Life Adjustment Factor a3l.



 DOWNLOADS 

Tapered Roller Bearing Engineering Information
(PDF, 663KB)

Bearing Life Calculation Tool

Bearing Dimensional Tolerances


Add To Cart Request Quote
<