All Product Types > ENGINEERED BEARINGS > Tapered Roller Bearings > Tapered Roller Bearings - Single Cones > Tapered Roller Bearings - Single Cones - Imperial > Part Number EE327220  

Part Number EE327220, Tapered Roller Bearings - Single Cones - Imperial

    Download PDF Download PDF   
    border="0" Printable Page  
    Email Email This Page  
    Save To Favorites Save To Favorites
  

This is the most basic and most widely used type of tapered roller bearing. It consists of two main separable parts: the cone (inner ring) assembly and the cup (outer ring). It is typically mounted in opposing pairs on a shaft.




Specifications  · Dimensions  · Abutment and Fillet Dimensions  · Basic Load Ratings  · Factors

Specifications

Series
327000

Cone Part Number
EE327220

Design Units
Imperial

Cage Type
Pin-Type

C1 - Dynamic Radial Rating (Two-Row, 1 million revolutions)1
1480000 lbf
6610000 N

C90(2) - Dynamic Radial Rating (Two-Row, 90 million revolutions)2
385000 lbf
1710000 N
1 Based on 1 x 106 revolutions L10 life, for the ISO life calculation method.
2 Based on 90 x 106 revolutions L10 life, for The Timken Company life calculation method. C90 and Ca90 are radial and thrust values for a single-row, C90(2) is the two-row radial value.


Dimensions

d - Cone Bore
22 in
558.8 mm

B - Cone Width
5.0937 in
129.380 mm


Abutment and Fillet Dimensions

R - Cone Backface "To Clear" Radius1
0.500 in
12.700 mm

da - Cone Frontface Backing Diameter
23.86 in
606 mm

db - Cone Backface Backing Diameter
24.57 in
624 mm

Ab - Cage-Cone Frontface Clearance
0.83 in
21.08 mm

Aa - Cage-Cone Backface Clearance
0.87 in
22.1 mm

a - Effective Center Location2
0.66 in
16.8 mm
1 These maximum fillet radii will be cleared by the bearing corners.
2 Negative value indicates effective center inside cone backface.


Basic Load Ratings

C90 - Dynamic Radial Rating (90 million revolutions)1
221000 lbf
984000 N

C1 - Dynamic Radial Rating (1 million revolutions)2
853000 lbf
3790000 N

C0 - Static Radial Rating
1520000 lbf
6760000 N

Ca90 - Dynamic Thrust Rating (90 million revolutions)3
154000 lbf
687000 N
1 Based on 90 x 106 revolutions L10 life, for The Timken Company life calculation method. C90 and Ca90 are radial and thrust values.
2 Based on 1 x 106 revolutions L10 life, for the ISO life calculation method.
3 Based on 90 x 106 revolutions L10 life, for The Timken Company life calculation method. C90 and Ca90 are radial and thrust values for a single-row, C90(2) is the two-row radial value.


Factors

K - Factor1
1.43

G1 - Heat Generation Factor (Roller-Raceway)
7790.8

G2 - Heat Generation Factor (Rib-Roller End)
478.4

Cg - Geometry Factor2
0.272
1 These factors apply for both inch and metric calculations. Consult your Timken representative for instruction on use.
2 Geometry constant for Lubrication Life Adjustment Factor a3l.



 DOWNLOADS 

Tapered Roller Bearing Engineering Information
(PDF, 663KB)

Bearing Life Calculation Tool

Bearing Dimensional Tolerances