All Product Types > ENGINEERED BEARINGS > Tapered Roller Bearings > Tapered Roller Bearings - Single Cones > Tapered Roller Bearings - Single Cones - Imperial > Part Number EE662303  

Part Number EE662303, Tapered Roller Bearings - Single Cones - Imperial

    Download PDF Download PDF   
    border="0" Printable Page  
    Email Email This Page  
    Save To Favorites Save To Favorites
  

This is the most basic and most widely used type of tapered roller bearing. It consists of two main separable parts: the cone (inner ring) assembly and the cup (outer ring). It is typically mounted in opposing pairs on a shaft.




Specifications  · Dimensions  · Abutment and Fillet Dimensions  · Basic Load Ratings  · Factors

Specifications

Series
660000

Cone Part Number
EE662303

Design Units
Imperial

Cage Type
Pin-Type

C1 - Dynamic Radial Rating (Two-Row, 1 million revolutions)1
1950000 lbf
8670000 N

C90(2) - Dynamic Radial Rating (Two-Row, 90 million revolutions)2
505000 lbf
2250000 N
1 Based on 1 x 106 revolutions L10 life, for the ISO life calculation method.
2 Based on 90 x 106 revolutions L10 life, for The Timken Company life calculation method. C90 and Ca90 are radial and thrust values for a single-row, C90(2) is the two-row radial value.


Dimensions

d - Cone Bore
23.0000 in
584.200 mm

B - Cone Width
5.5000 in
139.700 mm


Abutment and Fillet Dimensions

R - Cone Backface "To Clear" Radius1
0.310 in
7.900 mm

da - Cone Frontface Backing Diameter
24.57 in
624 mm

db - Cone Backface Backing Diameter
24.92 in
633 mm

Ab - Cage-Cone Frontface Clearance
0.41 in
10.41 mm

Aa - Cage-Cone Backface Clearance
0.71 in
18.03 mm

a - Effective Center Location2
0.01 in
0.3 mm
1 These maximum fillet radii will be cleared by the bearing corners.
2 Negative value indicates effective center inside cone backface.


Basic Load Ratings

C90 - Dynamic Radial Rating (90 million revolutions)1
290000 lbf
1290000 N

C1 - Dynamic Radial Rating (1 million revolutions)2
1120000 lbf
4980000 N

C0 - Static Radial Rating
1710000 lbf
7590000 N

Ca90 - Dynamic Thrust Rating (90 million revolutions)3
165000 lbf
732000 N
1 Based on 90 x 106 revolutions L10 life, for The Timken Company life calculation method. C90 and Ca90 are radial and thrust values.
2 Based on 1 x 106 revolutions L10 life, for the ISO life calculation method.
3 Based on 90 x 106 revolutions L10 life, for The Timken Company life calculation method. C90 and Ca90 are radial and thrust values for a single-row, C90(2) is the two-row radial value.


Factors

K - Factor1
1.76

G1 - Heat Generation Factor (Roller-Raceway)
8756.7

G2 - Heat Generation Factor (Rib-Roller End)
477.1

Cg - Geometry Factor2
0.264
1 These factors apply for both inch and metric calculations. Consult your Timken representative for instruction on use.
2 Geometry constant for Lubrication Life Adjustment Factor a3l.



 DOWNLOADS 

Tapered Roller Bearing Engineering Information
(PDF, 663KB)

Bearing Life Calculation Tool

Bearing Dimensional Tolerances