All Product Types > ENGINEERED BEARINGS > Tapered Roller Bearings > Tapered Roller Bearings - Single Cones > Tapered Roller Bearings - Single Cones - Imperial > Part Number EE923095  

Part Number EE923095, Tapered Roller Bearings - Single Cones - Imperial

    Download PDF Download PDF   
    border="0" Printable Page  
    Email Email This Page  
    Save To Favorites Save To Favorites
  

This is the most basic and most widely used type of tapered roller bearing. It consists of two main separable parts: the cone (inner ring) assembly and the cup (outer ring). It is typically mounted in opposing pairs on a shaft.




Specifications  · Dimensions  · Abutment and Fillet Dimensions  · Basic Load Ratings  · Factors

Specifications

Series
923000

Cone Part Number
EE923095

Design Units
Imperial

Cage Type
Pin-Type

C1 - Dynamic Radial Rating (Two-Row, 1 million revolutions)1
713000 lbf
3170000 N

C90(2) - Dynamic Radial Rating (Two-Row, 90 million revolutions)2
185000 lbf
822000 N
1 Based on 1 x 106 revolutions L10 life, for the ISO life calculation method.
2 Based on 90 x 106 revolutions L10 life, for The Timken Company life calculation method. C90 and Ca90 are radial and thrust values for a single-row, C90(2) is the two-row radial value.


Dimensions

d - Cone Bore
9 1/2 in
241.300 mm

B - Cone Width
3.9375 in
100.013 mm


Abutment and Fillet Dimensions

R - Cone Backface "To Clear" Radius1
0.25 in
6.4 mm

da - Cone Frontface Backing Diameter
10.55 in
268 mm

db - Cone Backface Backing Diameter
10.91 in
277 mm

Ab - Cage-Cone Frontface Clearance
0.23 in
5.8 mm

Aa - Cage-Cone Backface Clearance
0.43 in
10.9 mm

a - Effective Center Location2
-0.76 in
-19.3 mm
1 These maximum fillet radii will be cleared by the bearing corners.
2 Negative value indicates effective center inside cone backface.


Basic Load Ratings

C90 - Dynamic Radial Rating (90 million revolutions)1
106000 lbf
472000 N

C1 - Dynamic Radial Rating (1 million revolutions)2
409000 lbf
1820000 N

C0 - Static Radial Rating
544000 lbf
2420000 N

Ca90 - Dynamic Thrust Rating (90 million revolutions)3
61300 lbf
273000 N
1 Based on 90 x 106 revolutions L10 life, for The Timken Company life calculation method. C90 and Ca90 are radial and thrust values.
2 Based on 1 x 106 revolutions L10 life, for the ISO life calculation method.
3 Based on 90 x 106 revolutions L10 life, for The Timken Company life calculation method. C90 and Ca90 are radial and thrust values for a single-row, C90(2) is the two-row radial value.


Factors

K - Factor1
1.73

G1 - Heat Generation Factor (Roller-Raceway)
1630

G2 - Heat Generation Factor (Rib-Roller End)
136

Cg - Geometry Factor2
0.153
1 These factors apply for both inch and metric calculations. Consult your Timken representative for instruction on use.
2 Geometry constant for Lubrication Life Adjustment Factor a3l.



 DOWNLOADS 

Tapered Roller Bearing Engineering Information
(PDF, 663KB)

Bearing Life Calculation Tool

Bearing Dimensional Tolerances