Montage of Timken Bearing Products 
Search Catalog
        
 All Product Types    Tapered Roller Bearings - Single Cones - Imperial
View Cart View RFQs Express Ordering  | Shipping 
 | Tax 
 | Terms
 Shopping Cart 0 Items
 Request for Quote 0 Items
All Product Types > ENGINEERED BEARINGS > Tapered Roller Bearings > Tapered Roller Bearings - Single Cones > Tapered Roller Bearings - Single Cones - Imperial > Part Number EE971298  
Download PDF Download PDF     Printable Page     Email Email This Page     Save To Favorites Save To Favorites
Add To Cart Request Quote

Part Number EE971298, Tapered Roller Bearings - Single Cones - Imperial


This is the most basic and most widely used type of tapered roller bearing. It consists of two main separable parts: the cone (inner ring) assembly and the cup (outer ring). It is typically mounted in opposing pairs on a shaft.



Unit of Measure: Imperial Metric Both

Specifications  · Dimensions  · Abutment and Fillet Dimensions  · Basic Load Ratings  · Factors

Specifications

Series
970000

Cone Part Number
EE971298

Design Units
Imperial

Cage Type
Pin-Type

C1 - Dynamic Radial Rating (Two-Row, 1 million revolutions)1
676000 lbf
3010000 N

C90(2) - Dynamic Radial Rating (Two-Row, 90 million revolutions)2
175000 lbf
780000 N
1 Based on 1 x 106 revolutions L10 life, for the ISO life calculation method.
2 Based on 90 x 106 revolutions L10 life, for The Timken Company life calculation method. C90 and Ca90 are radial and thrust values for a single-row, C90(2) is the two-row radial value.


Dimensions

d - Cone Bore
12.9870 in
329.870 mm

B - Cone Width
3.0000 in
76.200 mm


Abutment and Fillet Dimensions

R - Cone Backface "To Clear" Radius1
0.190 in
4.800 mm

da - Cone Frontface Backing Diameter
14.06 in
357 mm

db - Cone Backface Backing Diameter
14.33 in
364 mm

Ab - Cage-Cone Frontface Clearance
0.25 in
6.4 mm

Aa - Cage-Cone Backface Clearance
0.34 in
8.6 mm

a - Effective Center Location2
0.15 in
3.8 mm
1 These maximum fillet radii will be cleared by the bearing corners.
2 Negative value indicates effective center inside cone backface.


Basic Load Ratings

C90 - Dynamic Radial Rating (90 million revolutions)1
101000 lbf
448000 N

C1 - Dynamic Radial Rating (1 million revolutions)2
388000 lbf
1730000 N

C0 - Static Radial Rating
562000 lbf
2500000 N

Ca90 - Dynamic Thrust Rating (90 million revolutions)3
57300 lbf
255000 N
1 Based on 90 x 106 revolutions L10 life, for The Timken Company life calculation method. C90 and Ca90 are radial and thrust values.
2 Based on 1 x 106 revolutions L10 life, for the ISO life calculation method.
3 Based on 90 x 106 revolutions L10 life, for The Timken Company life calculation method. C90 and Ca90 are radial and thrust values for a single-row, C90(2) is the two-row radial value.


Factors

K - Factor1
1.76

G1 - Heat Generation Factor (Roller-Raceway)
2433.2

G2 - Heat Generation Factor (Rib-Roller End)
282.5

Cg - Geometry Factor2
0.173
1 These factors apply for both inch and metric calculations. Consult your Timken representative for instruction on use.
2 Geometry constant for Lubrication Life Adjustment Factor a3l.



 DOWNLOADS 

Tapered Roller Bearing Engineering Information
(PDF, 663KB)

Bearing Life Calculation Tool

Bearing Dimensional Tolerances


Add To Cart Request Quote
<