All Product Types > ENGINEERED BEARINGS > Tapered Roller Bearings > Tapered Roller Bearings - Single Cones > Tapered Roller Bearings - Single Cones - Imperial > Part Number L305649  

Part Number L305649, Tapered Roller Bearings - Single Cones - Imperial


    Download PDF Download PDF   
    border="0" Printable Page  
    Email Email This Page  
    Save To Favorites Save To Favorites
  

This is the most basic and most widely used type of tapered roller bearing. It consists of two main separable parts: the cone (inner ring) assembly and the cup (outer ring). It is typically mounted in opposing pairs on a shaft.




Specifications  · Dimensions  · Abutment and Fillet Dimensions  · Basic Load Ratings  · Factors

Specifications

Series

L305600

Cone Part Number

L305649

Design Units

Imperial

Cage Type

Stamped Steel

C1 - Dynamic Radial Rating (Two-Row, 1 million revolutions)1

23800 lbf
106000
N

C90(2) - Dynamic Radial Rating (Two-Row, 90 million revolutions)2

6170 lbf
27400
N
1 Based on 1 x 106 revolutions L10 life, for the ISO life calculation method.
2 Based on 90 x 106 revolutions L10 life, for The Timken Company life calculation method. C90 and Ca90 are radial and thrust values for a single-row, C90(2) is the two-row radial value.


Dimensions

d - Cone Bore

2 in
50.80
mm

B - Cone Width

0.7188 in
18.258
mm


Abutment and Fillet Dimensions

R - Cone Backface "To Clear" Radius1

0.06 in
1.5
mm

da - Cone Frontface Backing Diameter

2.2 in
56
mm

db - Cone Backface Backing Diameter

2.28 in
58
mm

Ab - Cage-Cone Frontface Clearance

0.1 in
2.5
mm

Aa - Cage-Cone Backface Clearance

0 in
0
mm

a - Effective Center Location2

-0.1 in
-2.5
mm
1 These maximum fillet radii will be cleared by the bearing corners.
2 Negative value indicates effective center inside cone backface.


Basic Load Ratings

C90 - Dynamic Radial Rating (90 million revolutions)1

3540 lbf
15800
N

C1 - Dynamic Radial Rating (1 million revolutions)2

13700 lbf
60800
N

C0 - Static Radial Rating

20000 lbf
88800
N

Ca90 - Dynamic Thrust Rating (90 million revolutions)3

2160 lbf
9590
N
1 Based on 90 x 106 revolutions L10 life, for The Timken Company life calculation method. C90 and Ca90 are radial and thrust values.
2 Based on 1 x 106 revolutions L10 life, for the ISO life calculation method.
3 Based on 90 x 106 revolutions L10 life, for The Timken Company life calculation method. C90 and Ca90 are radial and thrust values for a single-row, C90(2) is the two-row radial value.


Factors

K - Factor1

1.64

G1 - Heat Generation Factor (Roller-Raceway)

38.8

G2 - Heat Generation Factor (Rib-Roller End)

29.8

Cg - Geometry Factor2

0.0841
1 These factors apply for both inch and metric calculations. Consult your Timken representative for instruction on use.
2 Geometry constant for Lubrication Life Adjustment Factor a3l.



 DOWNLOADS 

Tapered Roller Bearing Engineering Information
(PDF, 663KB)

Bearing Life Calculation Tool

Bearing Dimensional Tolerances