All Product Types > ENGINEERED BEARINGS > Tapered Roller Bearings > Tapered Roller Bearings - Single Cones > Tapered Roller Bearings - Single Cones - Imperial > Part Number L879946  

Part Number L879946, Tapered Roller Bearings - Single Cones - Imperial

    Download PDF Download PDF   
    border="0" Printable Page  
    Email Email This Page  
    Save To Favorites Save To Favorites
  

This is the most basic and most widely used type of tapered roller bearing. It consists of two main separable parts: the cone (inner ring) assembly and the cup (outer ring). It is typically mounted in opposing pairs on a shaft.




Specifications  · Dimensions  · Abutment and Fillet Dimensions  · Basic Load Ratings  · Factors

Specifications

Cone Part Number
L879946

Design Units
Imperial

Cage Type
Stamped Steel

C1 - Dynamic Radial Rating (Two-Row, 1 million revolutions)1
775000 lbf
3450000 N

C90(2) - Dynamic Radial Rating (Two-Row, 90 million revolutions)2
201000 lbf
894000 N
1 Based on 1 x 106 revolutions L10 life, for the ISO life calculation method.
2 Based on 90 x 106 revolutions L10 life, for The Timken Company life calculation method. C90 and Ca90 are radial and thrust values for a single-row, C90(2) is the two-row radial value.


Dimensions

d - Cone Bore
23.9920 in
609.397 mm

B - Cone Width
3.6250 in
92.075 mm


Abutment and Fillet Dimensions

R - Cone Backface "To Clear" Radius1
0.25 in
6.35 mm

da - Cone Frontface Backing Diameter
24.92 in
633 mm

db - Cone Backface Backing Diameter
25.28 in
642 mm

Ab - Cage-Cone Frontface Clearance
0.29 in
7.4 mm

Aa - Cage-Cone Backface Clearance
0.39 in
9.9 mm

a - Effective Center Location2
2.28 in
57.9 mm
1 These maximum fillet radii will be cleared by the bearing corners.
2 Negative value indicates effective center inside cone backface.


Basic Load Ratings

C90 - Dynamic Radial Rating (90 million revolutions)1
115000 lbf
513000 N

C1 - Dynamic Radial Rating (1 million revolutions)2
445000 lbf
1980000 N

C0 - Static Radial Rating
1230000 lbf
5470000 N

Ca90 - Dynamic Thrust Rating (90 million revolutions)3
96300 lbf
428000 N
1 Based on 90 x 106 revolutions L10 life, for The Timken Company life calculation method. C90 and Ca90 are radial and thrust values.
2 Based on 1 x 106 revolutions L10 life, for the ISO life calculation method.
3 Based on 90 x 106 revolutions L10 life, for The Timken Company life calculation method. C90 and Ca90 are radial and thrust values for a single-row, C90(2) is the two-row radial value.


Factors

K - Factor1
1.2

G1 - Heat Generation Factor (Roller-Raceway)
9580

G2 - Heat Generation Factor (Rib-Roller End)
1010

Cg - Geometry Factor2
0.306
1 These factors apply for both inch and metric calculations. Consult your Timken representative for instruction on use.
2 Geometry constant for Lubrication Life Adjustment Factor a3l.



 DOWNLOADS 

Tapered Roller Bearing Engineering Information
(PDF, 663KB)

Bearing Life Calculation Tool

Bearing Dimensional Tolerances