All Product Types > ENGINEERED BEARINGS > Tapered Roller Bearings > Tapered Roller Bearings - Single Cones > Tapered Roller Bearings - Single Cones - Imperial > Part Number LM770945  

Part Number LM770945, Tapered Roller Bearings - Single Cones - Imperial

    Download PDF Download PDF   
    border="0" Printable Page  
    Email Email This Page  
    Save To Favorites Save To Favorites
  

This is the most basic and most widely used type of tapered roller bearing. It consists of two main separable parts: the cone (inner ring) assembly and the cup (outer ring). It is typically mounted in opposing pairs on a shaft.




Specifications  · Dimensions  · Abutment and Fillet Dimensions  · Basic Load Ratings  · Factors

Specifications

Series
LM770900

Cone Part Number
LM770945

Design Units
Imperial

Cage Type
Stamped Steel

C1 - Dynamic Radial Rating (Two-Row, 1 million revolutions)1
583000 lbf
2590000 N

C90(2) - Dynamic Radial Rating (Two-Row, 90 million revolutions)2
151000 lbf
673000 N
1 Based on 1 x 106 revolutions L10 life, for the ISO life calculation method.
2 Based on 90 x 106 revolutions L10 life, for The Timken Company life calculation method. C90 and Ca90 are radial and thrust values for a single-row, C90(2) is the two-row radial value.


Dimensions

d - Cone Bore
17.7500 in
450.850 mm

B - Cone Width
3.3125 in
84.138 mm


Abutment and Fillet Dimensions

R - Cone Backface "To Clear" Radius1
0.25 in
6.4 mm

da - Cone Frontface Backing Diameter
18.66 in
474 mm

db - Cone Backface Backing Diameter
19.06 in
484 mm

Ab - Cage-Cone Frontface Clearance
0.2 in
5.1 mm

Aa - Cage-Cone Backface Clearance
0.48 in
12.2 mm

a - Effective Center Location2
1.2 in
30.5 mm
1 These maximum fillet radii will be cleared by the bearing corners.
2 Negative value indicates effective center inside cone backface.


Basic Load Ratings

C90 - Dynamic Radial Rating (90 million revolutions)1
86800 lbf
386000 N

C1 - Dynamic Radial Rating (1 million revolutions)2
335000 lbf
1490000 N

C0 - Static Radial Rating
773000 lbf
3440000 N

Ca90 - Dynamic Thrust Rating (90 million revolutions)3
67300 lbf
300000 N
1 Based on 90 x 106 revolutions L10 life, for The Timken Company life calculation method. C90 and Ca90 are radial and thrust values.
2 Based on 1 x 106 revolutions L10 life, for the ISO life calculation method.
3 Based on 90 x 106 revolutions L10 life, for The Timken Company life calculation method. C90 and Ca90 are radial and thrust values for a single-row, C90(2) is the two-row radial value.


Factors

K - Factor1
1.29

Cg - Geometry Factor2
0.237
1 These factors apply for both inch and metric calculations. Consult your Timken representative for instruction on use.
2 Geometry constant for Lubrication Life Adjustment Factor a3l.



 DOWNLOADS 

Tapered Roller Bearing Engineering Information
(PDF, 663KB)

Bearing Life Calculation Tool

Bearing Dimensional Tolerances