All Product Types > ENGINEERED BEARINGS > Tapered Roller Bearings > Tapered Roller Bearings - Single Cones > Tapered Roller Bearings - Single Cones - Imperial > Part Number M281635  

Part Number M281635, Tapered Roller Bearings - Single Cones - Imperial

    Download PDF Download PDF   
    border="0" Printable Page  
    Email Email This Page  
    Save To Favorites Save To Favorites
  

This is the most basic and most widely used type of tapered roller bearing. It consists of two main separable parts: the cone (inner ring) assembly and the cup (outer ring). It is typically mounted in opposing pairs on a shaft.




Specifications  · Dimensions  · Abutment and Fillet Dimensions  · Basic Load Ratings  · Factors

Specifications

Series
M281600

Cone Part Number
M281635

Design Units
Imperial

Cage Type
Pin-Type

C1 - Dynamic Radial Rating (Two-Row, 1 million revolutions)1
2290000 lbf
10200000 N

C90(2) - Dynamic Radial Rating (Two-Row, 90 million revolutions)2
595000 lbf
2650000 N
1 Based on 1 x 106 revolutions L10 life, for the ISO life calculation method.
2 Based on 90 x 106 revolutions L10 life, for The Timken Company life calculation method. C90 and Ca90 are radial and thrust values for a single-row, C90(2) is the two-row radial value.


Dimensions

d - Cone Bore
25.0000 in
635.000 mm

B - Cone Width
7.0000 in
177.800 mm


Abutment and Fillet Dimensions

R - Cone Backface "To Clear" Radius1
0.470 in
11.900 mm

da - Cone Frontface Backing Diameter
27.05 in
687 mm

db - Cone Backface Backing Diameter
27.52 in
699 mm

Ab - Cage-Cone Frontface Clearance
0.48 in
12.2 mm

Aa - Cage-Cone Backface Clearance
0.62 in
15.7 mm

a - Effective Center Location2
-0.53 in
-13.5 mm
1 These maximum fillet radii will be cleared by the bearing corners.
2 Negative value indicates effective center inside cone backface.


Basic Load Ratings

C90 - Dynamic Radial Rating (90 million revolutions)1
342000 lbf
1520000 N

C1 - Dynamic Radial Rating (1 million revolutions)2
1320000 lbf
5860000 N

C0 - Static Radial Rating
3120000 lbf
13900000 N

Ca90 - Dynamic Thrust Rating (90 million revolutions)3
195000 lbf
865000 N
1 Based on 90 x 106 revolutions L10 life, for The Timken Company life calculation method. C90 and Ca90 are radial and thrust values.
2 Based on 1 x 106 revolutions L10 life, for the ISO life calculation method.
3 Based on 90 x 106 revolutions L10 life, for The Timken Company life calculation method. C90 and Ca90 are radial and thrust values for a single-row, C90(2) is the two-row radial value.


Factors

K - Factor1
1.76

G1 - Heat Generation Factor (Roller-Raceway)
17300

G2 - Heat Generation Factor (Rib-Roller End)
805

Cg - Geometry Factor2
0.334
1 These factors apply for both inch and metric calculations. Consult your Timken representative for instruction on use.
2 Geometry constant for Lubrication Life Adjustment Factor a3l.



 DOWNLOADS 

Tapered Roller Bearing Engineering Information
(PDF, 663KB)

Bearing Life Calculation Tool

Bearing Dimensional Tolerances