Aerospace / Military
Aerospace Series General Aviation Rod Ends Spherical Bearings Mil Spec Series Rod Ends Spherical Bearings Bushings Approved Part Numbers
Commercial / Industrial
Rod End Bearings Inch Rod Ends Metric Rod Ends Spherical Bearings Inch Spherical Bearings Metric Spherical Bearings
Technical Resources
Terms and Definitions Articles Technical Data FAQs Key Term Translation Custom Engineered Products
Online Catalog
Engineers power search our entire catalog of bearing and bushings, with access to every attribute and technical specification possible. View our online catalog...
Request Information
This is the most basic and most widely used type of tapered roller bearing. It consists of two main separable parts: the cone (inner ring) assembly and the cup (outer ring). It is typically mounted in opposing pairs on a shaft.
Unit of Measure

Key Dimensions

Cone Part Number

 N/A M282249

Bore (d)

 N/A 26.8750 in682.625 mm

Inner Ring Width (B)

 N/A 7.3125 in185.738 mm
Dynamic Radial Load Rating - 1M Revs (C1) 1 N/A 1400000 lbf6240000 N
Dynamic Radial Load Rating - 90M Revs (C90) 2 N/A 364000 lbf1620000 N
K Factor 3 N/A 1.76

Other Dimensions

Weight

 N/A 1936.70 lb878.473 Kg
Effective Center Location4 N/A -0.6 in-15.2 mm
Max Shaft Fillet Radius5 N/A 0.380 in9.700 mm

Shaft Backing Shoulder Diameter - Frontface (da)

 N/A 28.46 in723 mm

Shaft Backing Shoulder Diameter - Backface (db)

 N/A 29.06 in738 mm

Cage Location rel. to BF (Aa)

 N/A 0.66 in16.8 mm

Cage Location rel. to FF (Ab)

 N/A 0.51 in13 mm

Ratings

Dynamic Axial Rating - 90M Revs (Ca90)6 N/A 207000 lbf921000 N

Static Radial Load Rating (CO)

 N/A 3340000 lbf14900000 N

Factors

G1 Factor

 N/A 18773

G2 Factor

 N/A 843.1
Geometry Factor (Cg)7 N/A 0.343
  • 1 Based on 1 x 106 revolutions L10 life, for the ISO life calculation method.
  • 2 Based on 90 x 106 revolutions L10 life, for The Timken Company life calculation method. C90 and Ca90 are radial and thrust values.
  • 3 These factors apply for both inch and metric calculations. Consult your Timken representative for instruction on use.
  • 4 Negative value indicates effective center inside cone backface.
  • 5 These maximum fillet radii will be cleared by the bearing corners.
  • 6 Based on 90 x 106 revolutions L10 life, for The Timken Company life calculation method. C90 and Ca90 are radial and thrust values for a single-row, C90(2) is the two-row radial value.
  • 7 Geometry constant for Lubrication Life Adjustment Factor a3l.