All Product Types > ENGINEERED BEARINGS > Tapered Roller Bearings > Tapered Roller Bearings - Single Cones > Tapered Roller Bearings - Single Cones - Imperial > Part Number NA385  

Part Number NA385, Tapered Roller Bearings - Single Cones - Imperial

    Download PDF Download PDF   
    border="0" Printable Page  
    Email Email This Page  
    Save To Favorites Save To Favorites
  

This is the most basic and most widely used type of tapered roller bearing. It consists of two main separable parts: the cone (inner ring) assembly and the cup (outer ring). It is typically mounted in opposing pairs on a shaft.




Specifications  · Dimensions  · Abutment and Fillet Dimensions  · Basic Load Ratings  · Factors

Specifications

Design Units
Imperial

C1 - Dynamic Radial Rating (Two-Row, 1 million revolutions)1
42200 lbf
188000 N

C90(2) - Dynamic Radial Rating (Two-Row, 90 million revolutions)2
10900 lbf
48700 N
1 Based on 1 x 106 revolutions L10 life, for the ISO life calculation method.
2 Based on 90 x 106 revolutions L10 life, for The Timken Company life calculation method. C90 and Ca90 are radial and thrust values for a single-row, C90(2) is the two-row radial value.


Dimensions

d - Cone Bore
2.1654 in
55.001 mm

B - Cone Width
1.03125 in
26.194 mm


Abutment and Fillet Dimensions

R - Cone Backface "To Clear" Radius1
0.14 in
3.5 mm

db - Cone Backface Backing Diameter
2.64 in
67 mm

Ab - Cage-Cone Frontface Clearance
-0.0515625 in
-1.3097 mm

Aa - Cage-Cone Backface Clearance
0.103125 in
2.6194 mm

a - Effective Center Location2
-0.12 in
-3 mm
1 These maximum fillet radii will be cleared by the bearing corners.
2 Negative value indicates effective center inside cone backface.


Basic Load Ratings

C90 - Dynamic Radial Rating (90 million revolutions)1
6280 lbf
28000 N

Ca90 - Dynamic Thrust Rating (90 million revolutions)2
3810 lbf
16900 N
1 Based on 90 x 106 revolutions L10 life, for The Timken Company life calculation method. C90 and Ca90 are radial and thrust values.
2 Based on 90 x 106 revolutions L10 life, for The Timken Company life calculation method. C90 and Ca90 are radial and thrust values for a single-row, C90(2) is the two-row radial value.


Factors

K - Factor1
1.65
1 These factors apply for both inch and metric calculations. Consult your Timken representative for instruction on use.



 DOWNLOADS 

Tapered Roller Bearing Engineering Information
(PDF, 663KB)

Bearing Life Calculation Tool

Bearing Dimensional Tolerances