All Product Types > ENGINEERED BEARINGS > Tapered Roller Bearings > Tapered Roller Bearings - Single Cones > Tapered Roller Bearings - Single Cones - Imperial > Part Number NA48291  

Part Number NA48291, Tapered Roller Bearings - Single Cones - Imperial

    Download PDF Download PDF   
    border="0" Printable Page  
    Email Email This Page  
    Save To Favorites Save To Favorites
  

This is the most basic and most widely used type of tapered roller bearing. It consists of two main separable parts: the cone (inner ring) assembly and the cup (outer ring). It is typically mounted in opposing pairs on a shaft.




Specifications  · Dimensions  · Abutment and Fillet Dimensions  · Basic Load Ratings  · Factors

Specifications

Design Units
Imperial

C1 - Dynamic Radial Rating (Two-Row, 1 million revolutions)1
105000 lbf
466000 N

C90(2) - Dynamic Radial Rating (Two-Row, 90 million revolutions)2
27200 lbf
121000 N
1 Based on 1 x 106 revolutions L10 life, for the ISO life calculation method.
2 Based on 90 x 106 revolutions L10 life, for The Timken Company life calculation method. C90 and Ca90 are radial and thrust values for a single-row, C90(2) is the two-row radial value.


Dimensions

d - Cone Bore
5 in
127 mm

B - Cone Width
1.6875 in
42.8625 mm


Abutment and Fillet Dimensions

R - Cone Backface "To Clear" Radius1
0.14 in
3.5 mm

db - Cone Backface Backing Diameter
5.55 in
141 mm

Ab - Cage-Cone Frontface Clearance
-0.084375 in
-2.143125 mm

Aa - Cage-Cone Backface Clearance
0.16875 in
4.28625 mm

a - Effective Center Location2
-0.22 in
-5.6 mm
1 These maximum fillet radii will be cleared by the bearing corners.
2 Negative value indicates effective center inside cone backface.


Basic Load Ratings

C90 - Dynamic Radial Rating (90 million revolutions)1
15600 lbf
69400 N

Ca90 - Dynamic Thrust Rating (90 million revolutions)2
8160 lbf
36300 N
1 Based on 90 x 106 revolutions L10 life, for The Timken Company life calculation method. C90 and Ca90 are radial and thrust values.
2 Based on 90 x 106 revolutions L10 life, for The Timken Company life calculation method. C90 and Ca90 are radial and thrust values for a single-row, C90(2) is the two-row radial value.


Factors

K - Factor1
1.91
1 These factors apply for both inch and metric calculations. Consult your Timken representative for instruction on use.



 DOWNLOADS 

Tapered Roller Bearing Engineering Information
(PDF, 663KB)

Bearing Life Calculation Tool

Bearing Dimensional Tolerances