Batch CAD Cart (0)
  • Cart is empty
This is the most basic and most widely used type of tapered roller bearing. It consists of two main separable parts: the cone (inner ring) assembly and the cup (outer ring). It is typically mounted in opposing pairs on a shaft.
Unit of Measure

Specifications

Series

25500

Cup Part Number

25523

Design Units

Imperial

Dimensions

D - Cup Outer Diameter

3.2650 in82.931 mm

C - Cup Width

0.875 in22.225 mm

Abutment and Fillet Dimensions

r - Cup Backface "To Clear" Radius1 0.090 in2.29 mm

Da - Cup Frontface Backing Diameter

3.05 in77.00 mm

Db - Cup Backface Backing Diameter

2.83 in71.88 mm

Factors

e - ISO Factor2 0.33
Y - ISO Factor3 1.79
Cg - Geometry Factor4 0.0801
  • 1 These maximum fillet radii will be cleared by the bearing corners.
  • 2 These factors apply for both inch and metric calculations. Consult your Timken representative for instruction on use.
  • 3 These factors apply for both inch and metric calculations. Consult your Timken representative for instruction on use.
  • 4 Geometry constant for Lubrication Life Adjustment Factor a3l.