All Product Types > ENGINEERED BEARINGS > Tapered Roller Bearings > Tapered Roller Bearings - Single Cups > Tapered Roller Bearings - Single Cups - Imperial > Part Number H429611  

Part Number H429611, Tapered Roller Bearings - Single Cups - Imperial

    Download PDF Download PDF   
    border="0" Printable Page  
    Email Email This Page  
    Save To Favorites Save To Favorites
  

This is the most basic and most widely used type of tapered roller bearing. It consists of two main separable parts: the cone (inner ring) assembly and the cup (outer ring). It is typically mounted in opposing pairs on a shaft.




Specifications  · Dimensions  · Abutment and Fillet Dimensions  · Factors

Specifications

Series
H429600

Cup Part Number
H429611

Design Units
Imperial


Dimensions

D - Cup Outer Diameter
9.7188 in
246.858 mm

C - Cup Width
1.8125 in
46.038 mm


Abutment and Fillet Dimensions

r - Cup Backface "To Clear" Radius1
0.130 in
3.30 mm

Da - Cup Frontface Backing Diameter
9.17 in
232.20 mm

Db - Cup Backface Backing Diameter
8.78 in
223.01 mm
1 These maximum fillet radii will be cleared by the bearing corners.


Factors

e - ISO Factor1
0.38

Cg - Geometry Factor2
0.127
1 These factors apply for both inch and metric calculations. Consult your Timken representative for instruction on use.
2 Geometry constant for Lubrication Life Adjustment Factor a3l.



 DOWNLOADS 

Tapered Roller Bearing Engineering Information
(PDF, 663KB)

Bearing Life Calculation Tool

Bearing Dimensional Tolerances