All Product Types > ENGINEERED BEARINGS > Tapered Roller Bearings > Tapered Roller Bearings - Single Cups > Tapered Roller Bearings - Single Cups - Imperial > Part Number HM959319  

Part Number HM959319, Tapered Roller Bearings - Single Cups - Imperial

    Download PDF Download PDF   
    border="0" Printable Page  
    Email Email This Page  
    Save To Favorites Save To Favorites
  

This is the most basic and most widely used type of tapered roller bearing. It consists of two main separable parts: the cone (inner ring) assembly and the cup (outer ring). It is typically mounted in opposing pairs on a shaft.




Specifications  · Dimensions  · Abutment and Fillet Dimensions  · Factors

Specifications

Series
HM959300

Cup Part Number
HM959319

Design Units
Imperial


Dimensions

D - Cup Outer Diameter
22.0452 in
559.948 mm

C - Cup Width
2.6725 in
67.882 mm


Abutment and Fillet Dimensions

r - Cup Backface "To Clear" Radius1
0.770 in
19.60 mm

Db - Cup Backface Backing Diameter
18.86 in
479.00 mm
1 These maximum fillet radii will be cleared by the bearing corners.


Factors

K - Factor1
0.54

e - ISO Factor2
4.62
1 These factors apply for both inch and metric calculations. Consult your Timken representative for instruction on use.
2 These factors apply for both inch and metric calculations. Consult your Timken representative for instruction on use.



 DOWNLOADS 

Tapered Roller Bearing Engineering Information
(PDF, 663KB)

Bearing Life Calculation Tool

Bearing Dimensional Tolerances