All Product Types > ENGINEERED BEARINGS > Tapered Roller Bearings > Tapered Roller Bearings - Single Cups > Tapered Roller Bearings - Single Cups - Imperial > Part Number KH715311  

Part Number KH715311, Tapered Roller Bearings - Single Cups - Imperial

    Download PDF Download PDF   
    border="0" Printable Page  
    Email Email This Page  
    Save To Favorites Save To Favorites
  

This is the most basic and most widely used type of tapered roller bearing. It consists of two main separable parts: the cone (inner ring) assembly and the cup (outer ring). It is typically mounted in opposing pairs on a shaft.




Specifications  · Dimensions  · Abutment and Fillet Dimensions  · Factors

Specifications

Series
H715300

Cup Part Number
KH715311

Design Units
Imperial


Dimensions

D - Cup Outer Diameter
5.3750 in
136.525 mm

C - Cup Width
1.4375 in
36.513 mm


Abutment and Fillet Dimensions

r - Cup Backface "To Clear" Radius1
0.130 in
3.30 mm

Da - Cup Frontface Backing Diameter
5.22 in
132.59 mm

Db - Cup Backface Backing Diameter
4.65 in
118.11 mm
1 These maximum fillet radii will be cleared by the bearing corners.


Factors

e - ISO Factor1
0.47

Cg - Geometry Factor2
0.0934
1 These factors apply for both inch and metric calculations. Consult your Timken representative for instruction on use.
2 Geometry constant for Lubrication Life Adjustment Factor a3l.



 DOWNLOADS 

Tapered Roller Bearing Engineering Information
(PDF, 663KB)

Bearing Life Calculation Tool

Bearing Dimensional Tolerances