All Product Types > ENGINEERED BEARINGS > Tapered Roller Bearings > Tapered Roller Bearings - Single Cups > Tapered Roller Bearings - Single Cups - Imperial > Part Number L282015X  

Part Number L282015X, Tapered Roller Bearings - Single Cups - Imperial

    Download PDF Download PDF   
    border="0" Printable Page  
    Email Email This Page  
    Save To Favorites Save To Favorites
  

This is the most basic and most widely used type of tapered roller bearing. It consists of two main separable parts: the cone (inner ring) assembly and the cup (outer ring). It is typically mounted in opposing pairs on a shaft.




Specifications  · Dimensions  · Abutment and Fillet Dimensions  · Factors

Specifications

Series
L282000

Cup Part Number
L282015X

Design Units
Imperial

Note
This part has a non-standard shoulder design. Please email customer CAD for shoulder details to ensure the proper design of mating components.


Dimensions

D - Cup Outer Diameter
34.5000 in
876.300 mm

C - Cup Width
3.0069 in
76.375 mm


Abutment and Fillet Dimensions

r - Cup Backface "To Clear" Radius1
0.08 in
2 mm

Db - Cup Backface Backing Diameter
32.83 in
833.90 mm
1 These maximum fillet radii will be cleared by the bearing corners.


Factors

K - Factor1
1.76

e - ISO Factor2
0.7
1 These factors apply for both inch and metric calculations. Consult your Timken representative for instruction on use.
2 These factors apply for both inch and metric calculations. Consult your Timken representative for instruction on use.



 DOWNLOADS 

Tapered Roller Bearing Engineering Information
(PDF, 663KB)

Bearing Life Calculation Tool

Bearing Dimensional Tolerances