Part Number L44613, Tapered Roller Bearings - Single Cups

Engineers power search our entire catalog of bearing and bushings, with access to every attribute and technical specification possible. View our online catalog...

Request Information

This is the most basic and most widely used type of tapered roller bearing. It consists of two main separable parts: the cone (inner ring) assembly and the cup (outer ring). It is typically mounted in opposing pairs on a shaft.

RELATED PRODUCTS

Unit of Measure

Key Dimensions | Other Dimensions | Factors

Key Dimensions

Cup Part Number	N/A L44613
O.D. (D)	N/A 2.0467 in51.986 mm
Outer Ring Width (C)	N/A 0.5000 in12.700 mm
e Factor ¹	N/A 0.37
Y Factor ²	N/A 1.6

Other Dimensions

Weight	N/A 0.10 Kg0.3 lb
Max Housing Fillet Radius³	N/A 0.08 in2.03 mm
Housing Backing Shoulder Dia. - Frontface (Da)	N/A 1.91 in48.51 mm
Housing Backing Shoulder Dia. - Backface (Db)	N/A 1.75 in44.45 mm

Factors

Geometry Factor (Cg)⁴

N/A 0.0526

¹ These factors apply for both inch and metric calculations. Consult your Timken representative for instruction on use.
² These factors apply for both inch and metric calculations. Consult your Timken representative for instruction on use.
³ These maximum fillet radii will be cleared by the bearing corners.
⁴ Geometry constant for Lubrication Life Adjustment Factor a3l.

Key Dimensions

Cup Part Number

O.D. (D)

Outer Ring Width (C)

Other Dimensions

Weight

Housing Backing Shoulder Dia. - Frontface (Da)

Housing Backing Shoulder Dia. - Backface (Db)

Factors