All Product Types > ENGINEERED BEARINGS > Tapered Roller Bearings > Tapered Roller Bearings - Single Cups > Tapered Roller Bearings - Single Cups - Imperial > Part Number LM124410  

Part Number LM124410, Tapered Roller Bearings - Single Cups - Imperial

    Download PDF Download PDF   
    border="0" Printable Page  
    Email Email This Page  
    Save To Favorites Save To Favorites
  

This is the most basic and most widely used type of tapered roller bearing. It consists of two main separable parts: the cone (inner ring) assembly and the cup (outer ring). It is typically mounted in opposing pairs on a shaft.




Specifications  · Dimensions  · Abutment and Fillet Dimensions  · Factors

Specifications

Series
LM124400

Cup Part Number
LM124410

Design Units
Imperial


Dimensions

D - Cup Outer Diameter
6.5625 in
166.688 mm

C - Cup Width
1.25 in
31.75 mm


Abutment and Fillet Dimensions

r - Cup Backface "To Clear" Radius1
0.130 in
3.30 mm

Da - Cup Frontface Backing Diameter
6.36 in
161.54 mm

Db - Cup Backface Backing Diameter
6.06 in
153.92 mm
1 These maximum fillet radii will be cleared by the bearing corners.


Factors

e - ISO Factor1
0.29

Y - ISO Factor2
2.04

Cg - Geometry Factor3
0.151
1 These factors apply for both inch and metric calculations. Consult your Timken representative for instruction on use.
2 These factors apply for both inch and metric calculations. Consult your Timken representative for instruction on use.
3 Geometry constant for Lubrication Life Adjustment Factor a3l.



 DOWNLOADS 

Tapered Roller Bearing Engineering Information
(PDF, 663KB)

Bearing Life Calculation Tool

Bearing Dimensional Tolerances