All Product Types > ENGINEERED BEARINGS > Tapered Roller Bearings > Tapered Roller Bearings - Single Cups > Tapered Roller Bearings - Single Cups - Imperial > Part Number LM170414X  

Part Number LM170414X, Tapered Roller Bearings - Single Cups - Imperial

    Download PDF Download PDF   
    border="0" Printable Page  
    Email Email This Page  
    Save To Favorites Save To Favorites
  

This is the most basic and most widely used type of tapered roller bearing. It consists of two main separable parts: the cone (inner ring) assembly and the cup (outer ring). It is typically mounted in opposing pairs on a shaft.




Specifications  · Dimensions  · Abutment and Fillet Dimensions  · Factors

Specifications

Series
LM170400

Cup Part Number
LM170414X

Design Units
Imperial

Note
This part has a non-standard shoulder design. Please email customer CAD for shoulder details to ensure the proper design of mating components.


Dimensions

D - Cup Outer Diameter
23.4232 in
594.949 mm

C - Cup Width
3.1063 in
78.9 mm


Abutment and Fillet Dimensions

r - Cup Backface "To Clear" Radius1
0.08 in
2 mm

Db - Cup Backface Backing Diameter
22.09 in
561.10 mm
1 These maximum fillet radii will be cleared by the bearing corners.


Factors

K - Factor1
1.96

e - ISO Factor2
0.62
1 These factors apply for both inch and metric calculations. Consult your Timken representative for instruction on use.
2 These factors apply for both inch and metric calculations. Consult your Timken representative for instruction on use.



 DOWNLOADS 

Tapered Roller Bearing Engineering Information
(PDF, 663KB)

Bearing Life Calculation Tool

Bearing Dimensional Tolerances