Aerospace / Military
Aerospace Series General Aviation Rod Ends Spherical Bearings Mil Spec Series Rod Ends Spherical Bearings Bushings Approved Part Numbers
Commercial / Industrial
Rod End Bearings Inch Rod Ends Metric Rod Ends Spherical Bearings Inch Spherical Bearings Metric Spherical Bearings
Technical Resources
Terms and Definitions Articles Technical Data FAQs Key Term Translation Custom Engineered Products
Online Catalog
Engineers power search our entire catalog of bearing and bushings, with access to every attribute and technical specification possible. View our online catalog...
Request Information
This is the most basic and most widely used type of tapered roller bearing. It consists of two main separable parts: the cone (inner ring) assembly and the cup (outer ring). It is typically mounted in opposing pairs on a shaft.

RELATED PRODUCTS

Unit of Measure

Key Dimensions

O.D. (D)

 N/A 140 mm5.5118 in

Cup Part Number

 N/A JW7010
e Factor 1 N/A 0.87
K Factor 2 N/A 0.67
Y Factor 3 N/A 0.69

Other Dimensions

Weight

 N/A 2.6 Kg5.8 lb

C - Cup Width

 N/A 27 mm1.063 in
Max Housing Fillet Radius4 N/A 3.05 mm0.12 in

Housing Backing Shoulder Dia. - Frontface (Da)

 N/A 133.60 mm5.26 in

Housing Backing Shoulder Dia. - Backface (Db)

 N/A 117.09 mm4.61 in

Factors

G1 Factor

 N/A 85.2

G2 Factor

 N/A 23.3
Geometry Factor (Cg)5 N/A 0.0984
  • 1 These factors apply for both inch and metric calculations. Consult your Timken representative for instruction on use.
  • 2 These factors apply for both inch and metric calculations. Consult your Timken representative for instruction on use.
  • 3 These factors apply for both inch and metric calculations. Consult your Timken representative for instruction on use.
  • 4 These maximum fillet radii will be cleared by the bearing corners.
  • 5 Geometry constant for Lubrication Life Adjustment Factor a3l.