Part Number 07196-B, Tapered Roller Bearings - Single Flanged Cups

Engineers power search our entire catalog of bearing and bushings, with access to every attribute and technical specification possible. View our online catalog...

Request Information

Like the TS bearing design, the TSF design consists of two main separable parts: the cone (inner ring) assembly and the cup (outer ring). It is typically mounted in opposing pairs on a shaft. TSF bearings have flanged cups to facilitate axial location and accurately align seals in through-bored housings.

RELATED PRODUCTS

Unit of Measure

Key Dimensions | Other Dimensions | Factors

Key Dimensions

Cup Part Number	N/A 07196-B
O.D. (D)	N/A 1.9687 in50.005 mm
Outer Ring Width (C)	N/A 0.3750 in9.525 mm
e Factor ¹	N/A 0.4
K Factor ²	N/A 1.45
Y Factor ³	N/A 1.49

Other Dimensions

Weight	N/A 0.10 Kg0.3 lb
Outer Ring Flange O.D.(D1)	N/A 2.1209 in53.871 mm
Outer Ring Flange Width (C2)	N/A 0.1094 in2.779 mm
Max Housing Fillet Radius⁴	N/A 0.04 in1.0 mm
Housing Backing Shoulder Dia. - Frontface (Da)	N/A 1.95 in49.02 mm

Factors

G1 Factor	N/A 1.07
G2 Factor	N/A 1.07
Geometry Factor (Cg)⁵	N/A 0.0509

¹ These factors apply for both inch and metric calculations. Consult your Timken representative for instruction on use.
² These factors apply for both inch and metric calculations. Consult your Timken representative for instruction on use.
³ These factors apply for both inch and metric calculations. Consult your Timken representative for instruction on use.
⁴ These maximum fillet radii will be cleared by the bearing corners.
⁵ Geometry constant for Lubrication Life Adjustment Factor a3l.

Key Dimensions

Cup Part Number

O.D. (D)

Outer Ring Width (C)

Other Dimensions

Weight

Outer Ring Flange O.D.(D1)

Outer Ring Flange Width (C2)

Housing Backing Shoulder Dia. - Frontface (Da)

Factors

G1 Factor

G2 Factor